PORTABLE MAGNETIC
DRILLS, HOLE PUNCHERS,
ACCESSORIES, AND
FABRICATION TOOLS
WWW.HOUGEN.COM
Volume 12
Electro-Hydraulic Hole Punchers
Page 26
Rotabroach® CuttersPage 15
Magnetic DrillsPage 3
2© 2012 Hougen Manufacturing, Inc.
INDEX
THIS YEAR!
Magnetic Drills Magnetic Drill Comparison Chart .................... HMD115 ........................................................... HMD150 ........................................................... HMD904 ........................................................... HMD925 ........................................................... HMD914 ........................................................... HMD505/508..................................................... HMD915 ..........................................................Magnetic Drill Accessories ............................Lubricant .............................................................Cutters Cutter Comparison Chart .................................. "12,000-Series" Rotabroach® Cutters ................"12,000-Series" Kits/Pilots/Extended .................Rotabroach® TiN Cutters ....................................Arbors for Machine Tools .................................... Copperhead™ Carbide Cutters ..........................
Sharpening Machine ..........................................."42/43,000-Series" Cutters .................................. RotaLoc™ & RotaLoc Plus™ Cutters .................... RotaCut™ Sheet Metal Cutters ............................Extended Reach Cutters .....................................Holcutter™ Sheet Metal Cutters ...........................Paint Shaker/P.O.P. ..............................................Electro-Hydraulic Hole Punchers Punch Comparison Chart ................................ 76000 ............................................................... 75002.5A .......................................................... 75003A ............................................................. 75004R ............................................................. 75005 ............................................................... 75006 ...............................................................Punches and Dies ..........................................Warranty Service Centers ...................................Other Helpful Information ...............................
3456789
1011-13
13
141517181819
20202122232425
26272829293030
31-3637
38-39
ROTAFOAM™CUTTING FLUID
(Page 13)
ROTAFOCUTTING
(Page
UPDATED PILOT SYSTEM FOR THE "12,000-SERIES" ROTABROACH® CUTTERS
(Page 16)
ADDITIONAL SIZES OF COPPERHEAD™ CARBIDE CUTTERS
(Page 19)
ROTACUT™MASTER KITS
(Page 22)
PORTABLE MAGNETIC DRILLS
3
HMD115 HMD150 HMD904 HMD925 HMD914 HMD505 / HMD508 HMD915
Low Profile Fabricating Heavy Duty Drilling
Annu
lar
Cutt
ers
RotaLoc™ WithAdapter
WithAdapter
WithAdapter
WithAdapter
RotaLoc Plus™With
AdapterWith
AdapterWith
AdapterWith
Adapter
Rotabroach®
“12,000-Series”With Adapter
(3/4" & Larger)
Copperhead™ Carbide Tipped
Rotabroach® “42/43,000-Series”
Mod
el S
peci
ficat
ions
Diameter Min./Max.
1/2" to 1-1/16" (12 - 27mm)
7/16" to 1-3/8" (12 - 35mm)
7/16" to 1-1/2" (12 - 38mm)
7/16" to 1-1/2"(1-1/4" Pwr. Fd.)
(12 - 38mm) (32mm Pwr Fd.)
7/16" to 2-1/16" (12 - 52mm)
7/16" to 2-3/8" (12 - 60mm)
3/4" to 3-1/16" (19 - 77mm)
Depth Max. 3/4" (19mm)
1" (25mm)
2" (50mm)
2" (50mm)
3" (76mm)
3" (76mm)
3" (76mm)
Cutter Mounting BayonetStyle
BayonetStyle
3/4"Double Flat
3/4"Double Flat
3/4”Double Flat
3/4"Double Flat
3/4" or 1-1/4"Weldon Shank
No-Load R.P.M. 450 450 450 450 350250 / 450450 / 750
120 / 332 (w/ gear swap)
Model Weight 21.3 lbs (9.7 kg)
22.7 lbs (10.3 kg)
27.5 lbs(12.5 kg)
37 lbs (16.8 kg)
41 lbs (18.6 kg)
45 lbs (20.4 kg)
69 lbs (31.3 kg)
Thru-the-Tool Coolant
Avai
labl
e Ac
cess
orie
s
Carrying Case Included
Optional
Swivel Base Optional Optional Optional
Pipe AdapterManual Mode
Bracket Mount
Tap AttachmentManual Mode
Vac-Pad™
Coolant Bottle Optional Included Included Included Included
Countersink KitManual Mode
With Adapter
Twist Drill Adapter
Manual Mode
With Adapter
Ratchet Drive
Arbor ExtenderManual Mode
With Adapter
Drill ChuckManual Mode
RotaLoc™ Spindle Adapter
Manual Mode
Low
HMD115
4
HOUGEN ® PORTABLE MAGNETIC DRILLSHMD115 ULTRA LOW PROFILE
Ultra Low Profile right angle drill for extreme tight spots.
tightest of spots. Only 6-11/16" (170mm) height
Patented quill feed arbor for smooth cuts and minimal maintenance
which requires no tools for installation or removal
easy maneuverability
used in place of handles
HO
MODELS & PART NO.
HMD115 SPECIFICATIONS
Electrical System 115V, 50/60 Hz - 8A, 960W 230V, 50/60 Hz - 4A, 960W
Motor 7A (115V), 3.5A (230V) 450 RPM
Diameter 1/2"- 1-1/16" (12mm - 27mm)
Depth 3/4" (19mm)
Cutter/MountRotaLoc™
with push & turn style shank
Dimensions6-11/16" H x 8-1/2" W x 11-5/8" L
(170mm H x 216mm W x 295mm L)
Magnet
Base 4" W x 7" L (102mm W x 178mm L)
1" Plate (25mm)
Dead Lift2080 lb. (944 kg)
Drillpoint Breakaway 849 lb. (385 kg)
3/8" Plate (9.5mm)
1283 lb. (582 kg) 535 lb. (243 kg)
Net Weight 21.3 lb. (9.7 kg)
Made in U.S.A.
No tools required to install cutters
Just insert and twist
Patented
Part No. Description Voltage CSA Special Plug
0115101 HMD115 115V X
0115201 HMD115 230V
0115301 HMD115 230V Type I
0115401 HMD115 230VNo
Plug
- All drills include: carrying case, Slick-Stik™ lubricant, & safety strap.
HMD150 LOW PROFILE
Low Profile lightweight right angle drill with large capacity.
Includes carrying handle
Patented quill feed arbor for smooth cuts and minimal maintenance
cutters which requires no tools for installation or removal
to side
used in place of feed handle
HOUGEN ® PORTABLE MAGNETIC DRILLS
5
H
Use a ratchet or wrench in tight areas
HMD150 SPECIFICATIONS
Electrical System 120V, 50/60 Hz - 9A, 1035W 230V, 50/60 Hz - 4.5A, 1035W
Motor 8A (120V), 4A (230V) 450 RPM
Diameter 7/16"- 1-3/8" (12mm - 35mm)
Depth 1" (25mm)
Cutter/MountRotaLoc™ and RotaLoc Plus™ with push & turn style shank
Dimensions7-13/16" H x 6-1/2" W x 11-11/16" L (198mm H x 165mm W x 297mm L)
Magnet
Base 4" W x 7" L (102mm W x 178mm L)
1" Plate (25mm)
Dead Lift2165 lb. (982 kg)
Drillpoint Breakaway 735 lb. (333 kg)
3/8" Plate (9.5mm)
1200 lb. (544 kg) 500 lb. (227 kg)
Net Weight 22.7 lb. (10.3 kg)
MODELS & PART NO.
Made in U.S.A.Patented
Part No. Description Voltage CSA Special Plug
0150101 HMD150 120V X
0150201 HMD150 230V
0150301 HMD150 230V Type I
0150401 HMD150 230V No Plug
- All drills include: carrying case, carrying handle, Slick-Stik™ lubricant, & safety strap.
HOUGEN ® PORTABLE MAGNETIC DRILLS HMD904
6
" x 2" capacity
available for a portable machine shop including: drill chucks, tapping, countersink, and more...
from side to side
system
location
and unlock handle
overhead, tight areas, and getting out over another piece of steel
Swivel Base adds even greater versatility:
The drill of choice for fabrication. Lightweight, compact, powerful, & versatile.
HMD904 SPECIFICATIONS
Electrical System 115V, 50/60 Hz - 9A, 1035W 230V, 50/60 Hz - 4.5A, 1035W
Motor 8A (115V), 4A (230V) 450 RPM
Diameter 7/16" - 1-1/2" (12mm - 38mm)
Depth 2" (50mm)
Cutter/MountRotabroach®, Copperhead™ and Fusion™
cutters, 3/4" (19mm) shank
Dimensions 16-3/8" H x 7-3/16" W x 8-1/4" L(416mm H x 183mm W x 210mm L)
Swivel Area 1-1/8" W x 1-3/8" L (28.5mm W x 34.9mm L)
Magnet
Base 3-1/8" W x 6-9/16" L (79mm W x 167mm L)
1" Plate (25mm)
Dead Lift1750 lb. (794 kg)
Drillpoint Breakaway 995 lb. (433 kg)
3/8" Plate (9.5mm)
1310 lb. (594 kg) 710 lb. (322 kg)
Swivel Magnet
1" Plate (25mm)
Dead Lift1340 lb.(608 kg)
Drillpoint Breakaway Forward - 695 lb. (315 kg)
Back - 835 lb. (379 kg)
3/8" Plate (9.5mm)
1015 lb. (460 kg)
Forward - 503 lb. (228 kg)Back - 605 lb. (274 kg)
Net Weight 27.5 lb. (12.5 kg)
Net Weight (904S) 30.5 lb. (13.8 kg)
S
HMD904 SPECIFICAT
MAGNETIC DRILLS
IONS
S
Made in U.S.A.
- All drills include: carrying case, pint of coolant, hex wrenches, and safety chain.
- Fabricator’s Kit Includes: drill, 10732 Jacobs Chuck, adapter, & Rotabroach Cutter kit.
MODELS & PART NO.Part No. Description Voltage Coolant
Bottle Swivel Cutter Kit CSA Special
Plug0904101 HMD904 115V X
0904102 HMD904 115V X X
0904103 HMD904 115V X
0904104 HMD904 115V X X
0904105 HMD904 Fabricator’s Kit
115V X 12002
0904108 HMD904 Fabricator’s Kit
115V X 12004
0904201 HMD904 230V
0904202 HMD904 230V X
0904203 HMD904 230V X
0904204 HMD904 230V X X
0904205HMD904
Fabricator’s Kit230V X 12002
0904208HMD904
Fabricator’s Kit230V X 12004
0904301 HMD904 230V Type I
0904302 HMD904 230V X Type I
0904303 HMD904 230V X Type I
0904304 HMD904 230V X X Type I
0904401 HMD904 230V No Plug
0904402 HMD904 230V X No Plug
0904403 HMD904 230V X No Plug
0904404 HMD904 230V X X No Plug
0904405HMD904
Fabricator's Kit230V X 12002 No
Plug
0904408HMD904
Fabricator's Kit230V X 12004 No
Plug
Optional Swivel Base(Patented)
Optional Coolant Bottle
HMD925 POWER FEEDPower Feed - Saves time and money with less effort.
optimizes feed rate for increased tool life and excellent hole quality
power feed system
system
available (manual mode only)
power feed mode
HOUGEN ® PORTABLE MAGNETIC DRILLS
7
HMD925 SPECIFICATIONS
Electrical System 115V, 50/60 Hz - 9A, 1035W 230V, 50/60 Hz - 4.5A, 1035W
Motor 8A (115V), 4A (230V) 450 RPM
ManualFeed
Dia.Depth
7/16" - 1-1/2" (12mm - 38mm) 2" (50mm)
Power Feed
Dia.Depth
7/16" - 1-1/4" (12mm - 32mm) 2" (50mm)
Cutter/MountRotabroach®, Copperhead™ and Fusion™
cutters, 3/4" (19mm) shank
Dimensions 17-1/8" H x 10-13/16" W x 11-3/16" L (435mm H x 275mm W x 284mm L)
Swivel Area 1-1/8" W x 1-3/8" L (28.5mm W x 34.9mm L)
Magnet
Base 3-1/8" W x 6-9/16" L (79mm W x 167mm L)
1" Plate (25mm)
Dead Lift1750 lb. (794 kg)
Drillpoint Breakaway 955 lb. (433 kg)
3/8" Plate (9.5mm)
1310 lb. (594 kg) 710 lb. (322 kg)
Swivel Magnet
1" Plate (25mm)
Dead Lift1340 lb. (608 kg)
Drillpoint Breakaway Forward - 695 lb. (315 kg)
Back - 835 lb. (379 kg)
3/8" Plate (9.5mm)
1015 lb. (460 kg)
Forward - 503 lb. (228 kg) Back - 605 lb. (274 kg)
Net Weight 37 lb. (16.8 kg)
Net Weight (925S) 40 lb. (18.1 kg)
MODELS & PART NO.
Made in U.S.A.
y y
eeedd d tototoololol
nly)
TABLE MAGNETIC DRILLLLS
ade in.S.A.
Part No. Description Voltage Coolant Bottle Swivel CSA Special
Plug0925102 HMD925 115V X X
0925104 HMD925 115V X X
0925202 HMD925 230V X
0925204 HMD925 230V X X
0925302 HMD925 230V X Type I
0925304 HMD925 230V X X Type I
0925402 HMD925 230V X No Plug
0925404 HMD925 230V X X No Plug
Patented
- All drills include: pint of coolant, safety chain, & hex wrenches.
ART NO
Increase your versatility with the
swivel base!
HMD914 SPECIFICATIONS
Electrical System 115V, 50/60 Hz - 12.2A, 1403W230V, 50/60 Hz - 6.1A, 1403W
Motor 11.2A (115V), 5.6A (230V) 350 RPM
Diameter 7/16" - 2-1/16" (12mm - 52mm)
Depth 3" (76mm)
Cutter/MountRotabroach®, Copperhead™ and Fusion™
cutters, 3/4" (19mm) shank
Dimensions 23" H x 7-1/2" W x 12-1/4" L (584mm H x 191mm W x 311mm L)
Swivel Area 1-1/8" W x 1-3/8" L (28.5mm W x 34.9mm L)
Magnet
Base 3-1/2" W x 7-3/4" L (89mm W x 197mm L)
1" Plate (25mm)
Dead Lift2230 lb. (1012 kg)
Drillpoint Breakaway 1180 lb. (535 kg)
3/8" Plate (9.5mm) 1245 lb. (565 kg) 795 lb. (361 kg)
Swivel Magnet
1" Plate (25mm)
Dead Lift2330 lb.
(1057 kg)
Drillpoint Breakaway For. - 980 lb. (445 kg)
Back - 1145 lb. (519 kg)
3/8" Plate (9.5mm)
1360 lb. (617 kg)
For. - 680 lb. (308 kg)Back - 815 lb. (370 kg)
Net Weight 41 lb (18.6 kg)
Net Weight (914S) 45 lb. (20.4 kg)8
HOUGEN ® PORTABLE MAGNETIC DRILLS HMD914
and gears
available to turn your drill into a portable machine shop including: drill chucks, tapping, countersink, and more...
from side to side
system
Precisely line up your pilot with the holes center location
and unlock handle
and getting out over another piece of steel
Powerful workhorse with a large capacity and built in versatility.
LS
HMD914 SPECIFICATIONS
LE MAGNETIC DRILLLS
Patented
Made in U.S.A.
Swivel Base adds even greater versatility:
Increase your versatility with the
swivel base!
Part No. Description Voltage Coolant Bottle Swivel Cutter
Kit CSA Special Plug
0914102 HMD914 115V X X
0914104 HMD914 115V X X
0914105HMD914
Fabricator’s Kit115V X 12002
0914108HMD914
Fabricator’s Kit115V X 12004
0914202 HMD914 230V X
0914204 HMD914 230V X X
0914205HMD914
Fabricator’s Kit230V X 12002
0914208HMD914
Fabricator’s Kit230V X 12004
0914302 HMD914 230V X Type I
0914304 HMD914 230V X X Type I
0914402 HMD914 230V XNo
Plug
0914404 HMD914 230V X XNo
Plug
0914405HMD914
Fabricator's Kit230V X 12002
No Plug
0914408HMD914
Fabricator's Kit230V X 12004
No Plug
MODELS & PART NO.
- All drills include: carrying case, pint of coolant, safety chain, & hex wrenches.
- Fabricator’s Kit Includes: drill, 10732 Jacobs Chuck, adapter, & Rotabroach Cutter kit.
Variety of Accessories
Available - Drill Chucks
- Tapping - & more
HMD505 & HMD508
HOUGEN ® PORTABLE MAGNETIC DRILLS
9
Optional pressurized coolant system increases productivity. Part No. 24140
Two speed gear box for increased tool life
S
Quill Feed Arbor for smooth cuts
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGENEE ® PO®
MODELS & PART NO.
HMD505 & HMD508 SPECIFICATIONS
Electrical System 115V, 50/60 Hz - 15A, 1725W 230V, 50/60 Hz - 7.5A, 1725W
Motor 14A (115V), 7A (230V) 250/450 RPM or 450/750 RPM
Diameter 7/16" - 2-3/8" (12mm - 60mm)
Depth 3" (76mm)
Cutter/MountRotabroach®, Copperhead™ and Fusion™
cutters, 3/4" (19mm) shank
Dimensions 20" H x 4-3/4" W x 10-3/4" L (508mm H x 121mm W x 273mm L)
Magnet
Base 4" W x 8" L (102mm W x 203mm L)
1" Plate (25mm)
Dead Lift2560 lb. (1161 kg)
Drillpoint Breakaway 1080 lb. (490 kg)
3/8" Plate (9.5mm) 1550 lb. (703 kg) 820 lb. (372 kg)
Net Weight 45 lb. (20.4 kg)
Made in U.S.A.
Patented
or higher speed 450 & 750 RPM (HMD508)
Patented quill feed arbor for smooth cuts and minimal maintenance
Engages full power when motor is turned on
from side to side
coolant system available
With coolant bottle and carrying handle removed, drill becomes only 15" (381mm) high
Part No. Description Voltage RPM Coolant Bottle
Special Plug
0505102 HMD505 115V 250/450 X
0505202 HMD505 230V 250/450 X
0505302 HMD505 230V 250/450 X Type I
0505402 HMD505 230V 250/450 X No Plug
0508102 HMD508 115V 450/750 X
0508202 HMD508 230V 450/750 X
0508302 HMD508 230V 450/750 X Type I
0508402 HMD508 230V 450/750 X No Plug
- All drills include: carrying case, pint of coolant, hex wrenches, & safety chain.
A rugged, high powered drill for fabrication and high production environments.
10
HOUGEN ® PORTABLE MAGNETIC DRILLSHMD915
OPTIONAL GEARING AVAILABLE FOR THE FOLLOWING CUTTER RPM
Power for large deep holes with multi-speed gear box.
five speeds
“42/43,000-Series” Cutters
with included adapter 40040 (02386 optional adapter)
from side to side
impactor points
LSMD915
LE MAGNETIC DRILLSLS
HMD915 SPECIFICATIONS
Electrical System 120V, 50/60 Hz - 11A, 1265W 230V, 50/60 Hz - 5.5A, 1265W
Motor 10A (120V), 5A (230V) 120/332 RPM (Included)
Diameter 3/4" - 3-1/16" (19mm - 77mm)
Depth 3" (76mm)
Cutter/MountRotabroach® "42/43,000-Series"
1-1/4" shank
Dimensions 26-1/4" H x 10" W x 17-3/4" L (667mm H x 254mm W x 451mm L)
Magnet
Base 5" W x 7" L (127mm W x 178mm L)
1" Plate (25mm)
Dead Lift2565 lb. (1163 kg)
Drillpoint Breakaway 1390 lb. (631 kg)
3/8" Plate (9.5mm) 1080 lb. (490 kg) 470 lb. (213 kg)
Net Weight 69 lb. (31.3 kg)
Part No. Description Voltage Special Plug
0915102 HMD915 120V
0915202 HMD915 230V
0915302 HMD915 230V Type I
0915402 HMD915 230V No Plug
MODELS & PART NO.
- All drills include: pint of coolant, hex wrenches, adapter for "12,000-Series" cutters, handle & safety chain.
Cutter RPMPart No. (Number Teeth Per Gear)
Shaft A Shaft B
100 40011 (16) 40017 (32)
120 40012 (18) 40016 (30)
200 40014 (24) 40014 (24)
332 40016 (30) 40012 (18)
400 40017 (32) 40011 (16)
Made in U.S.A.
DRILL CHUCKSPart No. Description
107311/2" Low Buck Chuck with Key (HMD904, HMD914 & HMD925)
107375/8" Low Buck Chuck with Key (HMD914 )
107321/2" Jacobs® Chuck with Key (HMD904, HMD914 & HMD925)
10738 5/8" Jacobs® Chuck with Key (HMD914)
For models HMD904/HMD925 1/2" Chuck requires 05536 Hex Spindle Adapter (01829 adapter for old style threaded motor spindles). Model HMD914 requires Spindle Adapter 40341 for either chuck size.
82º CARBIDE-INSERT COUNTERSINK KITPart No. Description
12965
(1) 82° Countersink (double fluted) with carbide inserts, (4) Pilots - 9/16, 11/16, 13/16, 15/16", plus a Torx Wrench
12960 9/16" Pilot
12961 11/16" Pilot
12962 13/16" Pilot
12963 15/16" Pilot
12966 Countersink Ass’y w/Carbide Inserts
05465 Replacement Torx Wrench
05467 Carbide Inserts (10 pieces)
05779Carbide Inserts 4215 Wear Resistant (10 pieces)
Adapter accepts a modified 118° twist drill with a 1/4" flatted shank that secures in adapter with a set screw.
TWIST DRILL ADAPTER KITPart No. Description02608 Twist Drill Adapter
03835 1/2" Twist Drill Bit
03837 7/16" Twist Drill Bit
03839 3/8" Twist Drill Bit
03841 5/16" Twist Drill Bit
03843 1/4" Twist Drill Bit
03845 Twist Drill Adapter Kit
Incorporates a planetary gear reverse with a 1:1 ratio. Reversing speed is equal to spindle speed so in-feed and out-feed of the unit can be employed without reversing motor direction. * The tapping unit will tap a 3/4-16 UNF but will not tap a 3/4-10 or larger.
TAPPING ATTACHMENT KITSPart No. Description
02463For use with HMD904.Order Collets separately (Threaded Drive)
05457For use with HMD904.Order Collets separately (Hex Drive-Includes 07339 adapter)
Collets:02495 for #6 thru 1/4" tap02496 for 1/4" thru 1/2" tap
10937For use with HMD914.Order Collets separately
Collets:10807 for #10 thru 1/2" tap10808 for 1/2" thru 3/4" tap*
HOUGEN ® MAGNETIC DRILL ACCESSORIES
Countersink provides 82° chamfers on holes quickly and easily. Two types of carbide inserts are available depending upon material hardness.
11
12
These kits let you drill pipe and tubing with a minimum 3" (76mm) diameter and some convex surfaces. Kits quickly attach to your Hougen® Magnetic Drill and positive non-slip positioning assures centered hole location. *Minimum 3" dia. schedule 160, maximum 12" dia. schedule 160.
PIPE ADAPTER KITPart No. Description
02564*Chain Mount for use with HMD904, HMD914, HMD505/508
10726Bracket Mount for use with HMD915
HOUGEN ® MAGNETIC DRILL ACCESSORIES
SPINDLE ADAPTERSPart No. Description
01829HMD904 Chuck Adapter (Old Style Threaded) (not shown)
02386 HMD915 3/4" Shank Adapter
05536HMD904 & HMD925 Chuck Adapter (Hex Drive)
07339HMD904 & HMD925 Tapping Adapter (Hex Drive) (not shown)
10851 1/2" Shank Adapter (not shown)
40040 HMD915 3/4" Weldon Adapter (not shown)
40226 HMD914 Tap Adapter
40341 HMD914 Chuck Adapter
0553640341
4022602386
Spindle adapters are required for some Hougen mag drill accessories.
These coolant systems offer an optional solution to the base drill unit system.The pressurized coolant system for the HMD505/508 is used for production applications or when gravity feed coolant is not applicable. The gravity feed bottle is an external add-on accessory for the HMD904.
ALTERNATIVE COOLANT SYSTEMSPart No. Description
0508716 oz. gravity feed bottle & kit for use with HMD904 (Threaded Drive)
0554816 oz. gravity feed bottle & kit for use with HMD904 (Hex Drive)
241402 gal. pressurized bottle for use with HMD505 & HMD508
Vac-Pad™ works with the HMD904 on non-ferrous materials, diamond plate and materials with surface imperfections up to 3mm deep. Standard shop air provides 761 lbf surface holding power at 85 kpa. Safety switch shuts off drill motor if air pressure drops.
VAC-PAD™
Part No. Description05000 Vacuum Base Attachment
ARBOR EXTENDERSPart No. Description10100 1" Arbor Extender Assembly
10200 2" Arbor Extender Assembly
When extended reach is necessary, Hougen offers 1" (25mm) and 2" (50mm) Arbor Extenders with a 1.310" (33.3mm)outside diameter that fit arbors using Rotabroach® “12,000-Series” Cutters. Contact Hougen’s Customer Service Department for more information about how the Arbor Extenders may help in your application.
With the RotaLoc™ Spindle Adapter you can take advantage of the fast change out of RotaLoc™ or RotaLoc Plus™ Annular Cutters in virtually all Hougen® Portable Magnetic Drills or any other drill that also accepts Rotabroach® “12,000-Series” Cutters.
ROTALOC™ SPINDLE ADAPTERPart No. Description17680 RotaLoc Adapter Assembly
04778 Replacement Adapter
04780 Replacement Pilot
With the feed handles removed the Ratchet Drive is easily installed, allowing use of a standard ratchet handle for drilling in confined areas. Ratchet Drive may be operated from either side of drill. (Ratchet not included)
Replace your lost or damaged carrying case to store and protect your Hougen magnetic drill.
CARRYING/STORAGE CASESPart No. Description
10725Optional metal case for Models HMD914/HMD925
17481 HMD150 replacement case
04550 HMD904 replacement case
04679 HMD505 replacement case
07258 HMD914 replacement case
07389 HMD115 replacement case
RATCHET DRIVESPart No. Description02449 For use with Model HMD904
24154 For use with Models HMD505 & HMD508 (requires 1" socket)
HOUGEN ® MAGNETIC DRILL ACCESSORIES
RotaMagic™ Concentrated Cutting Fluid is water soluble and yields a 10:1 ratio when mixed with water. (Biodegradable & Non-Toxic)
Part No. Description
11741-12(12) 1 Pint (.47L) Bottles - makes 1 pint each, 12 pints total
11742-4 makes 11 gallons (41.6L) each, 44 gallons (167.6L) total
11743makes 55 gallons (208L) total
LUBRICANT & CUTTING FLUID
benefits of the swivel base. Swivel base has 1-3/8" (34.9mm) forward and 1-1/8" (28.5mm) side to side movement.
(32mm) for 10904, HMD904 & HMD925
of cut to 2-1/4" (57mm) for HMD914 machines.
SWIVEL BASE UPGRADE KITPart No. Description
05757
10904/HMD904/HMD925 (115V)
05968 HMD904/HMD925/HMD908/HMD928 - (230V)
07042 HMD914 (115V) (New style housing only)
07043 HMD914 (230V) (New style housing only)
Convenient handle helps you to carry and/or move your drill around. Fits HMD115, HMD150, HMD904's, & HMD925's.
DRILL HANDLEPart No. Description07021 Handle to fit Hougen Motors
Slick-Stik™ is softer than other stick lubricants for easy application, superior adhesion to the tool, assuring thorough coverage. Specially formulated for use with Rotabroach Cutters. (Non-Toxic)
Slick Stik™ and RotaMagic™ are environmentally friendly and do not contain harmful ingredients as do many lubricants.
Part No. Description
11746-12(12) 1.68 oz. (48g) Slick-Stik™ Lubricant
11746-24(24) 1.68 oz. (48g) Slick-Stik™ Lubricant in display box
11745-6(6) 16 oz. (454g) Slick-Stik™ Lubricant
13
RotaFoam™ Cutting Fluid works on all types of metals to extend tool life and improve hole finish. Blue foamy lubricant visually assures thorough coverage.
Part No. Description
1174717 oz. (482g) RotaFoam™ Lubricant Single Can
11747-12(12) 17 oz. (482g) RotaFoam™ Lubricant
HO
UG
EN® CU
TTER CO
MPA
RISO
N CH
AR
T
Tool Series:RotaCut ™
Extended ReachHolcutter
™Carbide Holcutter ™
RotaLoc™
RotaLoc Plus™
Rotabroach
®Copperhead
™“42/43,000”
Diam
eter Range
Min. / M
ax.1/4" to 1-1/2" (6m
m - 25m
m)
3/8" to 9/16"11/16" to 3"
11/16" to 3"1/2" to 1-1/16"(12m
m - 27m
m)
7/16" to 1-3/8" (12m
m - 35m
m)
7/16" to 2-3/8" (12m
m - 52m
m)
9/16" to 2" (14m
m - 50m
m)
3/4" to 3-1/16"
Max. D
epth of C
ut1/4" to 1/2"
(6.4mm
- 12.7mm
)1/4" (6.4m
m)
1/8" (3.2mm
)1/8" (3.2m
m)
3/4" - (19mm
) 1" - (25m
m)
1", 2", or 3" (25m
m to 76m
m)
2", 3" or 4" (50, 76 or 102m
m)
2" or 3" (50m
m or 76m
m)
Mounting
3/8" or 1/2" Triple Flat S
hank3/8"
Triple Flat Shank
3/8"Triple Flat S
hank3/8" or 1/2"
Triple Flat Shank
Bayonet S
tyleB
ayonet Style
3/4" D
ouble Flat Shank
3/4" Double Flat
or Fusion™
Shank
3/4" Weldon or
1-1/4" Weldon
Cutter
Material(s)
Available
M2 H
SS
M2 H
SS
M2 H
SS
Carbide Tip
M42 H
SS
M2 H
SS
M2 H
SS
, M2 TiN
C
oat, or M42 TiN
Carbide Tip
M2 H
SS
or M
2 TiN C
oat
Can be
Resharpened
========== Disposable ==========
Available
Grind D
own
(Within Lim
its)
Max. A
pplication H
ardness Rating
275 BH
N
(28.5 HR
C)
275 BH
N
(28.5 HR
C)
275 BH
N
(28.5 HR
C)
450 BH
N
(47.2 HR
C)
350 BH
N
(37.7 HR
C)
275 BH
N
(28.5 HR
C)
275 BH
N325 B
HN
(TiN)
450 BH
N
(47.2 HR
C)
275 BH
N325 B
HN
(TiN)
Recom
mended
LubricationS
lick-Stik
™S
lick-Stik
™S
lick-Stik
™S
lick-Stik
™S
lick-Stik
™S
lick-Stik
™R
otaMagic
™R
otaMagic
™R
otaMagic
™
Alum
inum=================================== H
igh RP
M &
Fast Feed Rates S
uggested ===================================
Mild S
teel
Harder S
teelB
etterTiN
- Better
TiN - B
etter
Stainless S
teelR
ecomm
end S
peed Reducer
TiN C
oat or P
remium
R
ecomm
ended
TiN C
oat R
ecomm
ended
Rotabroach® cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, Rotabroach cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) Rotabroach cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Rotabroach cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. Rotabroach cutters convert a smaller area to chips, requiring less horsepower and thrust. The Hougen-Edge® feature is a patented tooth geometry that provides long tool life, less chatter, and extended resharpenability. The slug also offers a higher scrap value than loose chips.
Rotabroach® Annular Cutters with a Stack-Cut tooth geometry must be used whenever two or more plates are being drilled simultaneously. When drilling multiple pieces with traditional cutters, after the first piece is drilled, you need to stop and remove the slug before continuing on thru the second piece. Not a problem with stack cutters. Drill straight thru without stopping.
Many sizes of “12,000-Series” cutters are available from stock with stack cut geometry. All sizes are available by special request with stack-cut geometry.
Series of Cutters:
Hougen’s Technical Service Department should be contacted whenever special tooth geometry and applications will be necessary. *NOTE: Stack-Cut geometry is a standard feature of RotaLoc™ Cutters.
Carbide CuttersCopperhead™ Carbide tipped cutters are premium tools with unique Hougen features. Designed for harder, rough, rusted, or more abrasive materials, but offer excellent performance in mild and structural steel applications.
These cutters feature a full length flute to pull chips out when deep in the hole. A thinner cutter wall improves cutting speed, while special Hougen tooth geometry optimizes cutter life and hole finish. Plus they now are available with two different shanks: the standard two flat 3/4” shank and the Fusion style shank that fits Hougen mag drills and competitive tool-less arbors.
15
Two flats for cutter mounting: This system is very rigid, and offers up to 2x the tool life as compared to quick change tool mounting on competitive products.
Why use Stack-Cut Geometry?
Special Holemaking SolutionsHougen can solve your holemaking problems with creative solutions to help
and at a lower cost. We have helped thousands of customers with unique
send us an email with your holemaking challenge.
O.D. Margin: Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish.
Provides better chip evacuation, requires less h.p. & offers better performance in deeper holes.
Patented Hougen-Edge® Provides faster, smoother cuts,with less chatter.
I.D. Taper: Relief area between slug and cutter. Reduces horsepower and
HOUGEN® ROTABROACH® CUTTERS - SIMPLY THE BEST
Made in U.S.A.
Carferuofst
16
ROTABROACH® "12,000-SERIES" ANNULAR CUTTERSFor use with Hougen® Portable Magnetic Drills and many competitive models on materials up to 275 BHN (28.5 HRC). They are made of hardened M2 high speed steel and are precision ground for excellent performance throughout the cut and long tool life. They require less horsepower and thrust to cut, and last much longer than traditional holemaking methods. Rotabroach® cutters feature a 3/4" diameter double-flatted shank and are available in 1, 2, and 3" D.O.C. Modified end tooth geometry is also available for drilling in stacked plate applications. For extended tool life and lower cost per hole Rotabroach® Cutters are resharpenable.
* Indicates stack geometry is available as a stock item. To order: add 'S' to end of part no. ie...12226S. Other sizes available with stack geometry upon request (General lead time is 7-10 days).
Cutter Dia.(Inches)
DecimalEquivalent
Part No.1" D.O.C. 2" D.O.C. 3" D.O.C.
Use with Pilot 10531 10532 7/16 .4375 12114* 12214* ----1/2 .5000 12116* 12216* ---- 9/16 .5625 12118* 12218* ----
Use with Pilot 10527 10528 241315/8 .6250 12120* 12220* ----
11/16 .6875 12122* 12222* ---- 3/4 .7500 12124* 12224* 3-12224*
13/16 .8125 12126* 12226* 3-12226*7/8 .8750 12128* 12228* 3-12228*
15/16 .9375 12130* 12230* 3-12230*1 1.0000 12132* 12232* 3-12232*
1-1/16 1.0625 12134* 12234* 3-12234*1-1/8 1.1250 12136* 12236* 3-12236*1-3/16 1.1875 12138 12238* 3-12238*1-1/4 1.2500 12140 12240* 3-12240*1-5/16 1.3125 12142 12242* 3-122421-3/8 1.3750 12144 12244* 3-12244*1-7/16 1.4375 12146 12246* 3-122461-1/2 1.5000 12148* 12248* 3-122481-9/16 1.5625 12150 12250* 3-122501-5/8 1.6250 12152 12252 3-12252
1-11/16 1.6875 12154 12254 3-122541-3/4 1.7500 12156 12256 3-12256
1-13/16 1.8125 12158 12258 3-122581-7/8 1.8750 12160 12260 3-12260
1-15/16 1.9375 12162 12262 3-122622 2.0000 12164* 12264* 3-12264
2-1/16 2.0625 ---- 12266* 3-122662-1/8 2.1250 ---- 12268 3-122682-3/16 2.1875 ---- 12270 3-122702-1/4 2.2500 ---- 12272 3-122722-5/16 2.3125 ---- 12274 3-122742-3/8 2.3750 ---- 12276 3-12276
Cutter Dia.(Metric)
DecimalEquivalent
Part No.25mm D.O.C. 50mm D.O.C. 76mm D.O.C.
Use with Pilot 10531 10532 12mm .4724 12312 12412 ----13mm .5118 12313 12413 ----14mm .5512 12314 12414 ----15mm .5906 12315 12415 ----
Use with Pilot 10527 10528 2413116mm .6299 12316 12416 ----17mm .6693 12317 12417 ----18mm .7087 12318 12418 ----19mm .7480 12319 12419 1251920mm .7874 12320 12420 1252021mm .8268 12321 12421 1252122mm .8661 12322 12422 1252223mm .9055 12323 12423 1252324mm .9449 12324 12424 1252425mm .9843 12325 12425 1252526mm 1.0236 12326 12426 1252627mm 1.0630 12327 12427 1252728mm 1.1024 12328 12428 1252829mm 1.1417 12329 12429 1252930mm 1.1811 12330 12430 1253031mm 1.2205 12331 12431 1253132mm 1.2598 12332 12432 1253233mm 1.2992 12333 12433 1253334mm 1.3386 12334 12434 1253435mm 1.3779 12335 12435 1253536mm 1.4173 12336 12436 1253637mm 1.4567 12337 12437 1253738mm 1.4961 12338 12438 1253839mm 1.5354 12339 12439 1253940mm 1.5743 12340 12440 1254041mm 1.6142 12341 12441 1254142mm 1.6535 12342 12442 1254243mm 1.6929 12343 12443 1254344mm 1.7323 12344 12444 1254445mm 1.7717 12345 12445 1254546mm 1.8110 12346 12446 1254647mm 1.8504 12347 12447 1254748mm 1.8898 12348 12448 1254849mm 1.9291 12349 12449 1254950mm 1.9685 12350 12450 1255051mm 2.0079 12351 12451 12551 52mm 2.0472 12352 12452 12552
ROTABROACH® "12,000-SERIES" ANNULAR CUTTERSFor use with Hougen® Portable Magnetic Drills and many competitive models on materials up to 275 BHN (28.5 HRC). ®
They are made of hardened M2 high speed steel and are precision ground for excellent performance throughout the cut and long tool life. They require less horsepower and thrust to cut, and last much longggger than traditional holemaking methods. Rotabroach® cutters feature a 3/4® " diameter double-flatted shank and are available in 1, 2, and 3"D.O.C. Modified end tooth geometry is also available for drilling in stacked plate applications. For extended tool life and lower cost per hole Rotabroach® Cutters are resharpenable.
Cutter Dia.(Inches)
DecimalEquivalent
Part No.1" D.O.C. 2" D.O.C. 3" D.O.C.
Use with Pilot 10531 10532 7/16 .4375 12114* 12214* ----1/2 .5000 12116* 12216* ---- 9/16 .5625 12118* 12218* ----
Use with Pilot 10527 10528 241315/8 .6250 12120* 12220* ----
11/16 6875 12122* 12222*
Cutter Dia.(Metric)
DecimalEquivalent
Part No.25mm D.O.C. 50mm D.O.C. 76mm D.O.C.
Use with Pilot 10531 1053212mm .4724 12312 12412 ----13mm .5118 12313 12413 ----14mm .5512 12314 12414 ----15mmm 5.5906 12315 12415 ----
Use with Pilot 10527 1051052828 241241313116mm 6262999 12316 1241241616
Made in U.S.A.
- New Pilot System -Please Note there has been a Change in the Pilot System for the "12,000-Series" Cutters. Sizes 11/16" (18mm) and
smaller may use a different pilot now.
"12,000-SERIES" TAP DRILL SIZES
Cutter Dia.(Inches)
DecimalEquivalent Thread
Part No.1" D.O.C. 2" D.O.C.
Use with Pilot 10531 105327/16 .4375 1/2-13 12114 12214
29/64 .4531 1/2-20 ---- 1201031/64 .4844 9/16-12 ---- 1201133/64 .5156 9/16-18 ---- 1201217/32 .5313 5/8-11 12117 1221737/64 .5781 5/8-18 ---- 1201419/32 .5938 11/16-11 ---- 12219
Use with Pilot 10527 1052821/32 .6563 3/4-10 12121 1222111/16 .6875 3/4-16 12122 1222223/32 .7188 1/2-14 NPT ---- 1222349/64 .7656 7/8-9 ---- 1202025/32 .7812 7/8-9 12125 1222513/16 .8125 7/8-14 12126 122267/8 .8750 1-8 12128 12228
59/64 .9219 1-12 ---- 12025
17
A group of nine Rotabroach® cutter kits are conveniently packaged with the most popular diameters in protective cases for easy transporting and safe storage. Choose from fractional or metric diameters, in 1" or 2" depth of cut. Each kit includes hex wrenches and 2 pilots.
Choose this select series of cutters to give you extra reach in deep hole drilling applications. Each cutter features the same cutting geometry and action as the standard depth Rotabroach® cutters, but in the extended 4" and 6" depth of cut. Also available with stack-cut geometry.
The pilot serves three functions when used with Rotabroach® cutters in a portable magnetic drill; 1) Locate the holes center point, 2) Initiate coolant flow to the
Always use a sharp pilot for best results.
Part No. Mat’l / Coating D.O.C. Diameters Included
12001 M2 HSS 1" 9/16, 11/16, 13/16, 15/16, 1-1/16"12002 M2 HSS 2" 9/16, 11/16, 13/16, 15/16, 1-1/16"12003 M2 HSS 25mm 14mm, 16mm, 18mm, 20mm, 22mm12004 M2 HSS 50mm 14mm, 16mm, 18mm, 20mm, 22mm12005 M2 HSS 1" 5/8, 3/4, 7/8, 1, 1-1/8"12006 M2 HSS 2" 5/8, 3/4, 7/8, 1, 1-1/8"12007 M2 HSS 2" 7/16, 17/32, 21/32, 25/32, 7/8"12601 M2 / TiN 1" 9/16, 11/16, 13/16, 15/16, 1-1/16"12702 M2 / TiN 2" 9/16, 11/16, 13/16, 15/16, 1-1/16"
Cutter Dia.(Inches)
DecimalEquivalent
Part No.4" (102mm)
D.O.C.6" (152mm)
D.O.C.Use with Pilot 4-10528 6-10528
13/16 .8125 4-12226* 6-1222615/16 .9375 4-12230* 6-122301-1/16 1.0625 4-12234* 6-122341-3/16 1.1875 4-12238 6-12238
Part No. Description10527 1” D.O.C. Pilot (5/8" - 2-3/8" & 16mm - 52mm)10528 2” D.O.C. Pilot (5/8" - 2-3/8" & 16mm - 52mm)10531 1” D.O.C. Pilot (7/16 - 9/16" & 12 - 15mm)10532 2” D.O.C. Pilot (7/16 - 9/16" & 12 - 15mm)24131 3” D.O.C. Pilot (3/4" - 2-3/8" & 19mm - 52mm)
4-10528 4” Pilot for Extended Reach “12,000-Series”6-10528 6” Pilot for Extended Reach “12,000-Series”
Pilots for Old Style Rotabroach® Cutters10533 1” D.O.C. Pilot (1/2" - 11/16" & 13mm - 18mm)10534 2” D.O.C. Pilot (1/2" - 11/16" & 13mm - 18mm)
ROTABROACH® CUTTER KITS EXTENDED REACH CUTTERS
PILOTS - "12,000-SERIES"
A clean, accurate hole helps to make tapping an easier task. You can achieve that task easily with these tap drill size Rotabroach® Cutters. Kit #12007 contains five popular sizes of tap drills.
of nine Rotabroach® cutter kits are conveniently ®
ed with the most popular diameters in protective t ti d f t Ch
Choose thisselect seriescutters to giyou extra redeep hole dapplicationscutter featursame cuttingand action adepth Rotabin the extenof cut. Also geometry.
Cutter Dia.(Inches)
Use
Take an existing hole and make it larger using Hougen’s Hole Enlarging Pilots. Available in three select sizes. Replaceable “Nose” screws on to end of pilot.
Part No. Description07370 Replacement Pilot07373 11/16" Pilot assy for enlarging up to 13/16"07372 13/16" Pilot assy for enlarging up to 15/16"07371 15/16" Pilot assy for enlarging up to 1-1/16"07368 11/16" Replacement Nose07367 13/16" Replacement Nose07366 15/16" Replacement Nose
HOLE ENLARGING PILOTS - "12,000-SERIES"
Sold separately.
DRILL SIZES
adPartrt NNNN Noo.
1" D.O.C. 2" D.O C
p s. ular
s of ve ach in rilling . Each es theg geometry as the standard roach® cutters, but ®
ded 4" and 6" depth available with stack-cut
D REACH CUTTERSROTABROACH CUTTER K
18
Part No. Description
11016
Arbor Assembly (with set screws and spring) for 3/4" Shank Cutters up to 1/2" D.O.C. (Pilot not included)
Optional & Replacement Arbor Parts
11041 Arbor Body10623 1/4-28 Set Screw1106940222 7/16-14 Soc. Hd. Cap Screw
Pilots
11022Starter Pilot for 7/16" - 9/16"(12mm -15mm) Dia. Cutters
11031Starter Pilot for 5/8"- 2-1/16" & 16mm-52mm Dia. Cutters
Pilot for Old Style Cutters
11032Starter Pilot for 1/2"-11/16" & 13mm-18mm Dia. Cutters
You can also use Rotabroach® Cutters with stationary tools and drill presses. Triple flatted shank fits 1/2"
of cut “12,000-Series” Cutters for materials up to 12.7mm (1/2") thick maximum. (Not for use with Copperhead Cutters)
ARBORS FOR STATIONARY TOOLS
Rotabroach® cutters with a TiN Coating increases tool life, reduces friction, and operates at cooler temperatures. For materials up to 325 BHN (34.5 HRC) or gummy materials.
Rotabroach® Premium Steel Cutters with TiN Coating extends tool life, reduces friction, and operates at cooler temperatures. They’re made from M42 high speed steel for cutting materials up to 350 BHN (37.7 HRC) or gummy materials. These tools are specifically designed to stay cool throughout the cut. For materials up to 2" (50mm) thick. Made
Cutter Dia.(Inches)
DecimalEquiv.
Part No.1" D.O.C. 2" D.O.C.
Use with Pilot 10531 105327/16 .4375 12614 127141/2 .5000 12616 127169/16 .5625 12618 12718Use with Pilot 10527 105285/8 .6250 12620 12720
11/16 .6875 12622 127223/4 .7500 12624 12724
13/16 .8125 12626 127267/8 .8750 12628 12728
15/16 .9375 12630 127301 1.0000 12632 12732
Cutter Dia.(Inches)
DecimalEquiv.
Part No.1" D.O.C. 2" D.O.C.
Use with Pilot 10527 105281-1/16 1.0625 12634 127341-1/8 1.1250 12636 127361-3/16 1.1875 12638 127381-1/4 1.2500 12640 127401-5/16 1.3125 12642 127421-3/8 1.3750 12644 127441-7/16 1.4375 12646 127461-1/2 1.5000 12648 127481-9/16 1.5625 12650 127501-5/8 1.6250 12652 12752
1-11/16 1.6875 12654 127541-3/4 1.7500 12656 12756
1-13/16 1.8125 12658 127581-7/8 1.8750 12660 12760
1-15/16 1.9375 12662 127622 2.0000 12664 12764
2-1/16 2.0625 ---- 127662-1/8 2.1250 ---- 127682-3/16 2.1875 ---- 127702-1/4 2.2500 ---- 127722-5/16 2.3125 ---- 127742-3/8 2.3750 ---- 12776
Cutter Dia.(Inches)
DecimalEquiv. Part No.
Use with Pilot 105287/8 .8750 01354
15/16 .9375 013551 1.0000 01356
1-1/16 1.0625 013571-1/8 1.1250 01358
1-3/16 1.1875 013591-1/4 1.2500 01360
1-5/16 1.3125 013611-3/8 1.3750 01362
1-7/16 1.4375 013631-1/2 1.5000 01364
ROTABROACH® M2 CUTTERS TiN COATED ROTABROACH® M42 PREMIUM CUTTERS
Rotabrroaoaoaoachhchchchccc ®®®®
Premium tSteeeel Premium StS eeellllCutters with TiN Coating extends tool lif d
PREMIUM CUTTERS
Find your nearest Hougen dealer at www.hougen.com
Special sizes and different coatings for Rotabroach Cutters are available
on request. Contact the Hougen Customer Service Department for
more information.800-426-7818
Made in U.S.A.
19
COPPERHEAD™ CARBIDE TIP CUTTERS
Cutter Dia.(Metric)
Part No.
Fusion Shank Standard Two Flat Shank
Use with Pilot 10530 - 2" (50mm) D.O.C. 14mm 18814 1841415mm 18815 1841516mm 18816 1841618mm 18818 1841820mm 18820 1842022mm 18822 1842224mm 18824 1842425mm 18825 1842526mm 18826 1842628mm 18828 1842830mm 18830 1843031mm 18831 1843132mm 18832 1843234mm 18834 1843436mm 18836 1843638mm 18838 1843840mm 18840 1844042mm 18842 1844244mm 18844 1844445mm 18845 1844546mm 18846 1844648mm 18848 1844850mm 18850 18450
Kit No. Description 2" (50mm) DOCTwo Flat Shank Kits
18002Fractional Kit contains (5) cutters, 9/16, 11/16, 13/16, 15/16, 1-1/16", (2) Pilots & Hex Wrenches
18004Metric Kit contains (5) cutters, 14, 16, 18, 20, & 22mm, (2) Pilots & Hex Wrenches
COPPERHEAD™ CUTTER KITS
Patents & Patents Pending
90° Set Screw Flats for Hougen Magnetic
Drills
Fusion™ Groove Innovation for Tool-less Magnetic Drills
Patents90° Set Screw Flats
Cutter Dia.(Inches)
DecimalEquivalent
Part No.Fusion Shank Standard Two Flat Shank
D.O.C.2" D.O.C. (50mm)
2" D.O.C. (50mm)
3" D.O.C. (76mm)
4" D.O.C. (102mm)
Use with Pilot 10530 10530 10535 105409/16 .5625 18618 18218 ---- ----5/8 .6250 18620 18220 ---- ----
11/16 .6875 18622 18222 3-18222 4-182223/4 .7500 18624 18224 3-18224 4-18224
13/16 .8125 18626 18226 3-18226 4-182267/8 .8750 18628 18228 3-18228 4-18228
15/16 .9375 18630 18230 3-18230 4-182301 1.0000 18632 18232 3-18232 4-18232
1-1/16 1.0625 18634 18234 3-18234 4-182341-1/8 1.1250 18636 18236 3-18236 4-18236
1-3/16 1.1875 18638 18238 3-18238 4-182381-1/4 1.2500 18640 18240 3-18240 4-18240
1-5/16 1.3125 18642 18242 3-18242 4-182421-3/8 1.3750 18644 18244 3-18244 4-182441-1/2 1.5000 18648 18248 3-18248 4-182481-5/8 1.6250 18652 18252 3-18252 4-182521-3/4 1.7500 18656 18256 3-18256 4-182561-7/8 1.8750 18660 18260 3-18260 4-18260
2 2.0000 18664 18264 3-18264 4-18264
Kit No. Description 2" (50mm) DOCFusion™ Shank Kits
18006Fractional Kit contains (5) cutters, 9/16, 11/16, 13/16, 15/16, 1-1/16", (2) Pilots & Hex Wrenches
18008Metric Kit contains (5) cutters, 14, 16, 18, 20, & 22mm, (2) Pilots & Hex Wrenches
COPPERHEAD CUTTER KITSCopperhead Cutters are available in four kits for convenient storage and portability.
Cutter Dia.(Inches)
DecimalEquivalent
Part No.Fusion Standard Two Flat S
Copperhead™ Carbide Tip Cutters offer extended tool life on abrasive, tough-to-cut materials and in high-speed mag drills such as the HMD508. The unique Hougen design includes a special tooth geometry that helps maintain a
the set screw arbor system can result in up to 2x the tool life as tool-less systems.
Copperhead Cutters are available with two different shanks. The standard 3/4" two flat shank and the Fusion shank.
20
You can produce holes up to 3"-1/16 in diameter thru 3" material with the Hougen® HMD915 portable magnetic drill using Rotabroach® “42/43,000-Series” Annular Cutters. The heavy duty “42/43,000-Series” Annular Cutters handle the most demanding
deep holes. “42,000-Series” Cutters feature a Weldon Shank mounting (depending on cutter diameter) which also provides for convenient use in stationary machine tools. Also available in stack geometry and grind downs.
ROTABROACH® "42/43,000-SERIES" ANNULAR CUTTERS
Cutter Dia.(Inches)
DecimalEquiv.
Part No.M2 M2 TiN Coated
19mm Weldon Shank - 2" (50mm) D.O.C. 3/4 .7500 42024 22024
13/16 .8125 42026 220267/8 .8750 42028 22028
15/16 .9375 42030 220301 1.0000 42032 22032
1-1/16 1.0625 42034 220341-1/8 1.1250 42036 220361-3/16 1.1875 42038 220381-1/4 1.2500 42040 220401-5/16 1.3125 42042 220421-3/8 1.3750 42044 220441-7/16 1.4375 42046 22046
1-1/4" Weldon Shank - 2" (50mm) D.O.C. 1-1/2 1.5000 42048 220481-9/16 1.5625 42050 220501-5/8 1.6250 42052 22052
1-11/16 1.6875 42054 220541-3/4 1.7500 42056 22056
1-13/16 1.8125 42058 220581-7/8 1.8750 42060 22060
Cutter Dia.(Inches)
DecimalEquiv.
Part No.M2 M2 TiN Coated
1-1/4" Weldon Shank - 2" (50mm) D.O.C. 1-15/16 1.9375 42062 22062
2 2.0000 42064 220641-1/4" Weldon Shank - 3" (76mm) D.O.C.
2-1/16 2.0625 43066 230662-1/8 2.1250 43068 23068
2-3/16 2.1875 43070 230702-1/4 2.2500 43072 23072
2-5/16 2.3125 43074 230742-3/8 2.3750 43076 23076
2-7/16 2.4375 43078 230782-1/2 2.5000 43080 23080
2-9/16 2.5625 43082 230822-5/8 2.6250 43084 23084
2-11/16 2.6875 43086 230862-3/4 2.7500 43088 23088
2-13/16 2.8125 43090 230902-7/8 2.8750 43092 23092
2-15/16 2.9375 43094 230943 3.0000 43096 23096
3-1/16 3.0625 43098 23098
Convert CNC machines such as drill presses or mills into fast hole makers. 3 styles of holders: R-8, Straight, and Morse taper accommodate “12,000-Series” Cutters. Made in
ARBORS FOR MACHINE TOOLS
#3 Morsew/ Oil Inducer
The Model 10950 Sharpening Machine has been specifically designed for resharpening Rotabroach®, RotaLoc™, and RotaLoc Plus™ Annular Cutters. It provides ease of operation while restoring factory specified tooth geometry.
allow easier changes and tool sharpening.
accurate for precise tooth height.
SHARPENING MACHINE
Part No. Description
10950 Sharpening Machine (120V)
10950ASharpening Machine - No Motor
Purchase from local source)
03983 Borazon® Cup Wheel
04049 Tool holder - “12,000-Series”
04072 Borazon®
10747 Dressing Stick
10779 7/32" Hex Wrench for #04049
Optional Accessories
04147 Tool Holder - RotaLoc™ Cutters
04118 Work Stand
ROTABROACH®
Cutter Dia.(Inches)
Deecicimamamaam llllllEquiv.v
PartM2
Made in U.S.A.
Part No. Shank Size
Hole CapacityDiameter Depth
Arbor Assembly with Oil Inducer10804 #2 Morse 1" 1-1/2"10806 #3 Morse 2-3/8" 1-1/2"49849 R8 2-3/8" 2"49850 1" Straight 2-3/8" 2"
Arbor Assembly without Oil Inducer10814 #2 Morse 1" 1-1/2"10816 #3 Morse 2-3/8" 1-1/2"49853 R8 2-3/8" 2"49851 1" Straight 2-3/8" 2"
RotaLoc™ Annular Cutters are designed for use with the Hougen®
They’re made of M42 high speed steel and feature Stack Cut geometry for penetrating multiple plates in a single pass, up to 3/4" depth of cut.
RotaLoc Plus™ Annular Cutters are designed for the Hougen® HMD150 Low Profile Drill. They’re made of M2 high speed steel and are designed for a full 1" D.O.C.
Both series feature a 5/8" bayonet-style shank mounting for fast change out, with no other tools
required to install in the drill spindle, and can be as easily removed. For optimum cutter tool life and cutter efficiency use Hougen® Slick-Stik™ Lubricant.
ROTALOC™ & ROTALOC PLUS™
CUTTER KITS
Kit No. DescriptionRotaLoc Kits for HMD115 and HMD150
17001
Kit contains (10) cutters, 3/4" D.O.C. -1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 & 1-1/16" dia, plus (2) Pilots in a sturdy plastic case.
17700Kit contains (3) cutters, 3/4" D.O.C. -1/2, 5/8, 3/4" dia, plus (3) Pilots in a sturdy plastic case.
17701Kit contains (3) cutters, 3/4" D.O.C.- 9/16, 11/16, 13/16" dia, plus (3) Pilots in a sturdy plastic case.
17704Kit contains (3) cutters, 3/4" D.O.C.- 13mm, 15mm, 18mm dia, plus (3) Pilots in a sturdy plastic case.
RotaLoc Plus Kits for HMD150
17800Kit contains (3) cutters, 1" D.O.C. - 1/2, 5/8, 3/4" dia, plus (3) Pilots in a sturdy plastic case.
17801Kit contains (3) cutters, 1" D.O.C. - 9/16, 11/16, 13/16" dia, plus (3) Pilots in a sturdy plastic case.
17804Kit contains (3) cutters, 1" D.O.C. - 14mm, 16mm, 18mm dia, plus (3) Pilots in a sturdy plastic case.
ROTALOC™ ANNULAR CUTTERSM42 HSS - 3/4" D.O.C. - STACK CUT(FOR HMD115 OR HMD150)
Cutter Dia.(Inches)
DecimalEquiv. Part No.
Use with Pilot 171001/2 .5000 17116
9/16 .5625 171185/8 .6250 17120
11/16 .6875 171223/4 .7500 17124
13/16 .8125 171267/8 .8750 17128
15/16 .9375 171301 1.0000 17132
1-1/16 1.0625 17134
Cutter Dia.(Metric)
DecimalEquiv. Part No.
Use with Pilot 17100 - 3/4" (19mm) D.O.C12mm .4724 1730013mm .5118 1730214mm .5512 1730415mm .5906 1730616mm .6299 1730817mm .6693 1731018mm .7087 1731219mm .7480 1731420mm .7874 1731621mm .8268 1731822mm .8661 1732023mm .9055 1732224mm .9449 17324
24.5mm .9645 1732525mm .9843 1732626mm 1.0236 1732827mm 1.0630 17330
ROTALOC PLUS™ ANNULAR CUTTERSM2 HSS - 1" D.O.C. - (FOR HMD150)
Cutter Dia.(Inches)
DecimalEquiv. Part No.
Use with Pilot 174707/16 .4375 17214*1/2 .5000 17216*
17/32 .5313 17217*9/16 .5625 17218*5/8 .6250 17220*
11/16 .6875 17222*3/4 .7500 17224*
13/16 .8125 17226*7/8 .8750 17228*
15/16 .9375 17230*1 1.0000 17232*
1-1/16 1.0625 17234*1-1/8 1.1250 17236*1-3/16 1.1875 172381-1/4 1.2500 172401-5/16 1.3125 172421-3/8 1.3750 17244
Use with Pilot 17470 - 1" (25mm) D.O.C.12mm .4724 1740013mm .5118 1740214mm .5512 1740415mm .5906 1740616mm .6299 1740817mm .6693 1741018mm .7087 1741219mm .7480 1741420mm .7874 1741621mm .8268 1741822mm .8661 1742023mm .9055 1742224mm .9449 17424
24.5mm .9645 1742525mm .9843 1742626mm 1.0236 17428
26.5mm 1.0433 1742927mm 1.0630 1743028mm 1.1024 1743229mm 1.1417 1743430mm 1.1811 1743631mm 1.2205 1743832mm 1.2598 1744033mm 1.2992 1744234mm 1.3386 1744435mm 1.3779 17446
ROTALOC™ & ROTALOC PLUS™ PILOTSPart No. Description17100 Standard Pilot for HMD1151710117470 For use with HMD150
ROTALOC™ & ROTALOC PLUS™ ANNULAR CUTTERS AND KITS
* Indicates stack geometry is available as a stock item. To order: add 'S' to end of part no. ie...17216S. Other sizes available with stack geometry upon request (General lead time is 7-10 days). RotaLoc Cutters for the HMD115 come standard with stack geometry.
Patented
21
* For early model HMD115 w/o spring ejection and all HMD100 drills.
Made in U.S.A.
Cutter Dia.(Inches)
DecimalEquiv. Part No.
3/8"-24 Thread Mount & 1/4" D.O.C.Use with Arbor 11088 or 11006
1/4 .2500 111009/32 .2812 111025/16 .3125 1110411/32 .3438 11106
Use with Arbor 11088, 11089, or 110063/8 .3750 11108
13/32 .4062 1111027/64 .4219 111117/16 .4375 1111229/64 .4531 1111315/32 .4688 111141/2 .5000 11116
17/32 .5312 111189/16 .5625 111205/8 .6250 11124
11/16 .6875 1112823/32 .7188 111303/4 .7500 111321/2"-20 Thread Mount & 1/2" D.O.C.
Use with Arbor 11005 or 1101213/16 .8125 111367/8 .8750 11140
15/16 .9375 111441 1.0000 11148
1-1/16 1.0625 111521-1/8 1.1250 111561-3/16 1.1875 111601-1/4 1.2500 111641-5/16 1.3125 111651-3/8 1.3750 111661-7/16 1.4375 111671-1/2 1.5000 11168
22
Holemaking – faster and easier than with conventional twist drills and hole saws – in sheet metal, plate materials, and plastics up to 1/2” thick. RotaCut™ Cutters are precision-ground and produce clean, burr-free, round holes without deforming
the surrounding material. For use in hand held drills with either 3/8” or
1/2” chucks, and in air feed drill spindles for production work.
Lasts 10x longer and cuts 3x faster than twist drills or hole saws.
Hougen® offers kits packaged in sturdy cases for keeping handy the most often used sizes of RotaCut™ Annular Cutters.
Special sizes of RotaCut™ Cutters are available on request. Contact the
Hougen Customer Service Department for more information.
800-426-7818
Cutterr D Diaiaiaaia..(Inches)
DDDDDeDeDeDecimalEquiv Part No.
bububurrrrrr f-ffrerereee,e, rr rouououndndnd hh holololeseses ww wititithohohoututut dd defefefororormimimingngng ththee susurrrrououndndiningg mamateteririalal. FoForr ususee inin
hand held drills with either 3//8” or 1/1/2”2 c chuhuckckss, a andnd i inn aiairr fefeeded d dririllll
spiindldles f for proddu tctiion wo krkLasts Lasts 10x10x longer and cutslonger and cuts
3x faster than twist drillsor hole saws.
Part No. Description
11075C (Fractional)
Kit contains an 11088 Arbor Assembly, Center Punch, extra Pilot, and (7) Cutters: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, & 3/4" (DOC: 1/4" / 6.4mm)
11075-12 (Fractional)Contains (12) 11075 Kits in a pop up display box
11077 (Metric)
Kit contains an 11088 Arbor Assembly, Center Punch, extra Pilot, and (7) Metric Cutters: 8, 10, 12, 14, 16, 18, & 20mm (DOC: 1/4" / 6.4mm)
11078 (Fractional)
Kit contains an 11005 Arbor Assembly, Center Punch, extra Pilot, and (6) Cutters: 7/8, 1, 1-1/8, 1-1/4, 1-3/8, & 1-1/2" (DOC: 1/2" / 12.7mm)
11078-12 (Fractional) Contains (12) 11078 Kits
11085 (Fractional)
Fractional Master Kit 16 Sizes of cutters from 1/4" to 3/4", extra Pilots, Arbor & Center Punch (DOC: 1/4" / 6.4mm)
11085-12 (Fractional) Contains (12) 11085 Kits
11086 (Metric)
Metric Master Kit16 Sizes of cutters from 6mm to 20mm, extra Pilots, Arbor & Center Punch (DOC: 1/4" / 6.4mm)
s ss
Hougen® offers kits packaged in sturdy ®
. sss
ROTACUT™ SHEET METAL HOLE CUTTERS ROTACUT™ KITS
Cutter Dia.(Metric)
DecimalEquiv. Part No.
3/8"-24 Thread Mount & 6.4mm D.O.C.Use with Arbor 11088 or 11006
6mm .2362 112067mm .2756 112078mm .3150 11208
8.5mm .3346 112859mm .3543 11209
Use with Arbor 11088, 11089, or 1100610mm .3937 1121011mm .4331 1121112mm .4724 1121213mm .5118 1121314mm .5512 1121415mm .5906 1121516mm .6299 1121617mm .6693 1121718mm .7087 1121819mm .7480 1121920mm .7874 11220
1/2"-20 Thread Mount & 12.7mm D.O.C.Use with Arbor 11005 or 11012
21mm .8268 1122122mm .8661 1122223mm .9055 1122324mm .9449 1122425mm .9843 11225
Remove spotwelds in auto body and restoration work quickly with the RotaCut™ Premium Spotweld Cutter. Heavy cutter wall and fast cutting action that can last for hundreds or thousands of spotwelds.
ROTACUT™ SPOTWELD CUTTER
Part No. Description
11200CPackage includes 3/8" RotaCut p/n 11108, Arbor p/n 11088, and instructions.
(Fractional)16toCe6.
11085-12(F ti l) Co
(Metric)16to& 6.
Made in U.S.A.
23
Hougen® Extended Reach Cutters are designed for applications where additional reach and a shallow depth of cut is required. They’re ideally suited for trailer hitch installations, or single pass through holes in square and rectangular pipe and tubing. The cutter and arbor are a single-piece construction and include a spring loaded pilot for “popping out” the slug at the end of the cut. For use in 3/8" or larger drill chucks.
EXTENDED REACH CUTTERS
Cutter Dia.(Inches)
DecimalEquiv. Part No.
Triple Flat Arbor with .80" flute & 1/4" D.O.C.3/8 .3750 16112
7/16 .4375 161141/2 .5000 16116
9/16 .5625 16118
Part No. Description
16005Kit contains (4) Cutters: 3/8, 7/16, 1/2, & 9/16", (2) extra Pilots, and a Hex Wrench
ARBORS FOR 1/2” CHUCKSPart No. Description
With 1/2”-20 Mounting Thread
11005Arbor with Pilot Pin (For use with 13/16” thru 1-1/2” dia.)
11012Arbor with Pilot Pin (For use with 15/16" Drill Bushing)
ARBORS FOR 3/8” CHUCKSPart No. Description
With 3/8"-24 Mounting Thread11088 Arbor with Pilot Pin
11089Arbor with Pilot Drill (For use with 3/8" thru 3/4" dia.)
11006Arbor with Pilot Pin (For use in 5/8" Drill Bushing)
g at the d of the
For use 3/8" or ger drill cks.
Part No Descriiptptttioiiioioionnnnnnn
03913C
REPLACEMENT ARBOR PARTSPart
Desc.Arbor Assembly / Component Part No.
11088 11089 11005 11006 11012Arbor Body
90224 90225 11074 11035 11038
Pilot 11083 11027 11083 11084
Ejector Spring
11034 11049 11047 11045 11048
Set Screw
11050 11051 11052 11050 11052
Hex Washer
---- ---- 03996 ---- 03996
Spacer Washer
11056 11056 ---- 11056 ----
Stop Washer
11055 11055 ---- ---- ----
Button Screw
---- 11053 ---- ---- ----
Stop Rod
---- 11064 ---- ---- ----
Ejector Collar
---- ---- ---- 11059 11061
RollPin
---- ---- ---- 11062 11063
Plunger ---- ---- ---- 11058 ----
Misc.11260
Ball----
11050Screw
---- ----
Hougen Manufacturing maintains acomplete stock of replacement parts for the Sheet Metal Arbors listed below.Our computerized order entry systemmeans your required parts are oftenprocessed and shipped the same daythat the order is received.
ROTACUT™ SHEET METAL ARBORS AND PARTS
Part No. Description
14005C
Sturdy plastic case contains Arbor, Pilots, Hex Washer, instructions, and HSS Holcutters: 7/8, 1-1/8, 1-3/8, 1-3/4, 2 & 2-1/2"
14005-12 Case of (12) 14005 Kits 24
Featuring a 4:1 gear ratio, the Holcutter™ Speed Reducer mounts directly to your 1/2" drill and maintains torque while reducing RPMs for large hole diameters. Cutters mount to Speed Reducer with no arbor required.
* Details marked are required to operate Speed Reducer
Cutter Dia.(Inches)
DecimalEquiv. Part No.
11/16 .6875 142223/4 .7500 14224
13/16 .8125 142267/8 .8750 14228
15/16 .9375 142301 1.0000 14232
1-1/16 1.0625 142341-1/8 1.1250 14236
CARBIDE HOLCUTTER™ FOR SHEET METAL AND THIN MATERIALS
HOLCUTTER™ KIT
Part No. Description13007C Pilot for 14009 Arbor (3 Pk)
14009Arbor (3/8" Chuck) for Quad-Lead Threaded Cutters
Arbors for Discontinued Holcutters
14001 Arbor for 3/8" Threaded Cutters
14002Arbor for older style Double “D” Holcutters
14004 Arbor for Double “D” Cutters
Part No. Description 14008 Speed Reducer for 1/2" Drills
*04938 Clamp Handle
*04939 3/16" Pilot
04942 Thread Adapter for 3/8" Drills
04943Triple-flatted Shank Adapter (for use in 1/2" drill chuck)
04812Hex Washer (for easy cutter removal)
HOLCUTTER™ SPEED REDUCER
1-3/16 1.1875 142381-1/4 1.2500 142401-5/16 1.3125 142421-3/8 1.3750 142441-7/16 1.4375 142461-1/2 1.5000 142481-9/16 1.5625 142501-5/8 1.6250 14252
1-11/16 1.6875 142541-3/4 1.7500 142561-7/8 1.8750 14260
2 2.0000 142622-1/16 2.0625 142642-1/8 2.1250 142662-1/4 2.2500 142682-3/8 2.3750 142722-1/2 2.5000 142742-9/16 2.5625 142762-5/8 2.6250 142782-3/4 2.7500 142802-7/8 2.8750 14282
3 3.0000 14284
HOLCUTTER™ FOR SHEET METAL AND THIN MATERIALS
Cutter Dia.(Inches)
DecimalEquiv. Part No.
Replacement Pilot 14301 & Spring 14303 (3/8” Chuck)
11/16 .6875 143223/4 .7500 14324
13/16 .8125 143267/8 .8750 14328
15/16 .9375 143301 1.0000 14332
1-1/16 1.0625 143341-1/8 1.1250 143361-3/16 1.1875 143381-1/4 1.2500 143401-5/16 1.3125 14342
Cutter Dia.(Inches)
DecimalEquiv. Part No.
1-3/8 1.3750 143441-1/2 1.5000 143481-5/8 1.6250 143521-3/4 1.7500 14356
2 2.0000 143622-1/8 2.1250 143662-1/4 2.2500 143682-3/8 2.3750 14372
Replacement Pilot 14302 & Spring 14304 (1/2” Chuck)
2-1/2 2.5000 143742-5/8 2.6250 143782-3/4 2.7500 14380
3 3.0000 14384
Part No. DeDeDeDeDeDeeeDDeDDDeDDDDDDDDeDeDDDDD ssscsscscccccssssscccccccsccccscccssccccccccccscccscccsscscscccssccssscscsccsssssss rrrriririrrr ptionSturdy plastic case contains
OLCUTTER™ KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKIIIIIIT
HSS Holcutters last 10x longer and cut 3x faster than bi-metal hole saws or twist drills. All
cutters use a single arbor, with a
patented Quad-Lead thread mounting system. For materials up to 1/8" (3.2mm) thick.
Part No. Description14301 Pilot for cutters up to 2-3/8" (3 Pk)14302 Pilot for cutters 2-1/2" to 3" (3 Pk)14303 Spring for cutters up to 2-3/8" (3 Pk)14304 Spring for cutters 2-1/2" to 3" (3 Pk)
Carbide Holcutters cut smooth, fast, burr-free holes in all types of materials, from soft aluminum to tough-to-cut stainless and cast iron. Rugged construction for day in and
day out use. Features a shoulder stop to prevent over penetration of
provides long tool life and smooth cutting action. Dramatically outlasts bi-metal hole saws and step drills. For materials up to 1/8" (3.2mm) thick. (All cutters include arbor, pilot and spring.)
CARBIDE HOLCUTTER FOR SHEET META
Cutter Dia.(Inches)( )( )
RepR lacement
11/163/4
13/167/8
15/16
ddaday y ououtt t ususeestststopopop tt tooo prprpreee
prpp ovides locucuttttiningg acactitibibi-m tet lal h homamattete iriri lalalss uucucuttttttererss iinin lclcl
HOLCUTTER FOR SHSS last andthht
cusingl
patentethread mounting systemup to 1/8" (3.2mm) thick.
Made in U.S.A.
The Holcutter™ display is designed to work along side of the RotaCut™ Hole Making Center, or as a stand alone.
25
These counter top displays help to make the point-of-purchase sale for you. They’re easy to setup and are a good way to get the product in front of your customer.
The lightweight Hougen® Tornado II™ Portable Paint Shaker can be used on benches or the floor without bolting it down. Blending cycles can be set to numerous time intervals via the convenient up-front control panel. Three-axis orbital action assures complete mixing of gallons, pints, quarts or aerosols. Easy to use four-point clamping securely holds containers while minimal moving parts provide quiet operation. Weight: 24lbs (10.9 kg) 26" H x 15-3/8" W x 11-1/2" D (660mm H x 391mm W x 292mm D) Can/Paint weight limit: 11 lbs (5kg)
The RotaCut™ Hole Making Center is designed to get the RotaCut™ Cutters and Kits in front of customers. You’ll display open kits, replacement cutters, arbors and pilots. Your customers have the option of buying any single component or a mix of their choosing.
TORNADO II™ PAINT SHAKER
POP DISPLAYS
Mixes Pints, Quarts, Gallons, & Aerosols
Part No. Description11075-12 Case of (12) RotaCut™ Kits
11745-6 Case of (6) Large Slick-Stik™
11746-24 Case of (24) Mini Slick-Stik™
12900
Case of (28) Rotabroach® “12,000-Series” Cutters in 1" and 2" D.O.C. in sizes from 7/16" up to 1-3/8" diameter
These counter top displays help to make the
TORNADO II PAINT SHAKERPart No. Description51200 Tornado II™ Paint Shaker (115V)
51230 Tornado II™ Paint Shaker (230V)
HOLCUTTER™ HOLE MAKING CENTERPart No. Description
14000C
Holcutter™ Hole Making Center includes Kits and replacement components in clamshell packages for easy display.
ROTACUT™ HOLE MAKING CENTERPart No. Description
11000C
RotaCut™ Hole Making Center includes Kits and replacement components in clamshell packages for easy display.
Made in U.S.A.
Model: 76000 75002.5A 75003A 75004R 75005 75006
SPEC
IFIC
ATIO
NS
Pressure (Tons) 8.5 13.2 14.85 22 27.5 34.1
ApproximatePunching Speed
4 seconds 1.2 seconds 1.5 seconds 2 seconds 3 seconds 4 seconds
Maximum Punch Throat Depth
1.02" (26mm) 2-3/8" (60.3mm)2-5/32"
(54.8mm)1-9/16"
(39.7mm)3-15/16" (100mm)
1-31/32" (50mm)
Single PhaseMotor
18V Cordless(120V Charger)
120V/50-60 Hz AC 9.5 Amp /1050 Watts
120V/50-60 Hz AC 9.5 Amp / 1050 Watts
120V/50-60 Hz AC 9.5 Amp / 1050 Watts
120V/50-60 Hz AC 12.2 Amps
120V/50-60 Hz AC 12.2 Amps
Weight (Less Work Stand)
16.5 lbs.(7.5 kg)
26 lbs. (11.8 kg)
35.8 lbs. (16.2 kg)
39.7 lbs. (18 kg)
79.3 lbs. (36 kg)
65 lbs. (29.5 kg)
Shipping Weight(Approx.)
32 lbs. (14.5 kg)
49.7 lbs. (22.5 kg)
60.7 lbs. (27.5 kg)
63.6 lbs. (28.8 kg)
110 lbs. (49.9 kg)
88.3 lbs. (40 kg)
ROUN
D Maximum Hole Size19/32"
(15mm)25/32"
(20mm)25/32"
(20mm)13/16"
(20.6mm)7/8"
(22.2mm)15/16"
(23.8mm)
Maximum Thickness
1/4"(6.4mm)
19/64" (7.5mm)
19/64" (7.5mm)
3/8" (9.5mm)
3/8" (9.5mm)
1/2" (12.7mm)
OBLO
NG Maximum Hole Size7/16" x 5/8"
(11mm x 16.5mm)9/16" x 13/16"
(14mm x 21mm)9/16" x 13/16"
(14mm x 21mm)9/16" x 13/16"
(14mm x 21mm)11/16" x 13/16" (18mm x 21mm)
11/16" x 13/16" (18mm x 21mm)
Maximum Thickness
1/4"(6.4mm)
1/4" (6.4mm)
1/4" (6.4mm)
3/8" (9.5mm)
3/8" (9.5mm)
1/2" (12.7mm)
SQUA
RE Maximum Hole Size7/16"
(11mm)
Maximum Thickness
1/4" (6.4mm)
STEE
L ST
YLES
Flat Bar
Channel
H-Steel
Angle
LipChannel
Punch-Pro™
26
Electro-hydraulic Hole Punches
Hougen-Ogura punches are self contained units, no need for external hydraulic pumping systems.
HOUGEN®-OGURA™ PUNCHES ARE ONLY AVAILABLE IN 120V AND SOLD IN NORTH AND SOUTH AMERICA
76000
76000 SpecificationsPressure (Tons) 8.5
Approximate Punching Speed 4 seconds
Maximum Hole Size - Round 19/32" - (15mm)
Maximum Thickness - Round 1/4" - (6.4mm)
Maximum Hole Size - Oblong 7/16" x 5/8" (11mm x 16.5mm)
Maximum Thickness - Oblong 1/4" - (6.4mm)
Maximum Punch Throat Depth 1.02" - (26mm)
Weight 16.5 lbs - (7.5 kg)
18V CORDLESS HOLE PUNCHER
27
Includes: carrying case, 7/16" punch & die, charger (120V).Optional Stand: Part No. 75166Replacement Battery: 76094
°
TM
You’ll punch more holes, more often in more places all in less time using a Hougen®-Ogura™ Punch-Pro™ Electro-hydraulic Hole Puncher because of its lightweight and single body
that require hydraulic hoses, the Punch-Pro™ series has unique single-body construction meaning there is only a 120V power cord to deal with.
Punch-Pro™ models require less punching tonnage than traditional hole punchers because of an exclusive punch and die design. Six Punch-Pro™ models offer punching diameters from 1/4" up to 15/16" thru material thicknesses from 5/64" up to 1/2".Punching beats drilling.
A Punch-Pro™ dramatically reduces your hole-making costs over conventional drilling methods.
Time Savings — Punch-Pro™ users have documented increases in productivity over other holemaking methods. One user stated that he had achieved a 75% time savings over the old method of using twist drills.
Fast Cycle Times — Punch clean and accurate holes in as little as 1.2 seconds. A single trigger actuates the punch while an exclusive auto-return mechanism returns to the punch starting position.
Ease Of Handling — Single body lightweight construction starting at 16.5 lbs make these units easy to handle and move with only a single 120V power cord and no separate hydraulics. And operator fatigue is reduced since the Punch-Pro™ does all the work.
Accuracy — Eliminates the need to pre-drill or pre-punch. To confirm the punch position, simply
to the center mark for the hole location. A convenient release valve allows ease of repositioning if required.
Designed for applications typically done with hand held
in all types of punching applications, onsite or in the shop. Punch round, oblong and square holes in materials from 5/64" up to 1/4" thick. Its 2-3/8" throat depth provides excellent reach and versatility. Easily confirm the hole
returns to the starting position after the punching cycle is complete. Work stand, foot switch, 9/16" punch & (2) dies, tool kit and carrying case are included.
75002.5A
Flat Bar Channel H-Steel Angle
Punch-Pro™
PUNCH MORE HOLES, MORE OFTEN, IN MORE PLACES, IN LESS TIME
28Punches are designed to punch mild or structural steel. For other
materials contact Hougen Technical Service 800-426-7818.
75002.5A SpecificationsPressure (Tons) 13.2
Approximate Punching Speed 1.2 seconds
Maximum Hole Size - Round 25/32" - (20mm)
Maximum Thickness - Round 19/64" - (7.5mm)
Maximum Hole Size - Oblong 9/16" x 13/16" (14mm x 21mm)
Maximum Thickness - Oblong 1/4" - (6.4mm)
Maximum Hole Size - Square 7/16" - (11mm)
Maximum Thickness - Square 1/4" - (6.4mm)
Maximum Punch Throat Depth 2-3/8" - (60.3mm)
120V/50-60Hz AC 9.5 Amps / 1050 Watts
Weight (less work stand) 26 lbs - (11.8 kg)
Shipping Weight (approx) 49.7 lbs - (22.5 kg)
Lip ChannelFlat Bar Channel H-Steel Angle
Provides extra versatility with a unique throat design and the ability to adapt to two punch and die styles. The standard punch/long die combination allows flanged sections to be "swallowed" while the long punch/standard die combination allows the tooling to reach through narrow
and automatic punch return features like all models. Work stand, foot switch, 9/16" punch & (2) dies, tool kit and carrying case are included.
Portable electro-hydraulic punch with 22 tons of punching pressure can quickly punch through 3/8" materials in 2
down feature. Punch automatically returns to the starting position after the punching cycle is complete. If punch ever resists returning to the home position, squeeze the trigger for power feed return. The 75004R is a self contained unit that only requires 120V power. There is no separate hydraulics or power packs required. Includes: work stand, foot switch, 11/16" punch & (2) dies, tool kit and carrying case.
The 75004R replaces the 75004A.
75003A 75004R
Flat Bar Channel H-Steel Angle
29
75003A SpecificationsPressure (Tons) 14.85
Approximate Punching Speed 1.5 seconds
Maximum Hole Size - Round 25/32" - (20mm)
Maximum Thickness - Round 19/64" - (7.5mm)
Maximum Hole Size - Oblong 9/16" x 13/16" (14mm x 21mm)
Maximum Thickness - Oblong 1/4" - (6.4mm)
Maximum Punch Throat Depth 2-5/32" - (54.8mm)
120V/50-60Hz AC 9.5 Amps / 1050 Watts
Weight (less work stand) 35.8 lbs - (16.2 kg)
Shipping Weight (approx) 60.7 lbs - (27.5 kg)
75004R SpecificationsPressure (Tons) 22
Retract Pressure (Tons) 14
Approximate Punching Speed 2 seconds
Maximum Hole Size - Round 13/16" - (20.6mm)
Maximum Thickness - Round 3/8" - (9.5mm)
Maximum Hole Size - Oblong 9/16" x 13/16" (14mm x 21mm)
Maximum Thickness - Oblong 3/8" - (9.5mm)
Maximum Punch Throat Depth 1-9/16" - (39.7mm)
120V/50-60Hz AC 9.5 Amps / 1050 Watts
Weight (less work stand) 39.7 lbs - (18 kg)
Shipping Weight (approx) 63.6 lbs - (28.8 kg)
75004R
This heavy-duty model is built for punching up to 7/8" diameter holes in materials up to 3/8" thick. The addition of eyebolts on both sides of the unit allows for easy attachment of a lift assist or a counter-balancer for improved ergonomics. Its 3-15/16" throat depth adds to its versatility covering a wide range of work pieces.
Punch automatically returns to the starting position after the punching cycle is complete. Work stand, foot switch, 13/16" punch & (2) dies and tool kit are included.
75005 75006
Flat Bar Channel H-Steel Angle
Our heaviest duty model, the 75006, develops 34.1 tons pressure and will produce round holes up to a maximum of 15/16” diameter and punch through a maximum thickness of 1/2" material in approximately 4 seconds. It has eyebolts on both sides for easy attachment of a lift assist or a counter-balancer for improved ergonomics. Like all Punch-Pro models, its single body design makes it easy to use anywhere. Easily confirm the hole position
the starting position after the punching cycle is complete. Work stand, foot switch, 13/16" punch & (2) dies and tool kit are included.
75006
Flat Bar Channel H-Steel Angle
30
75005 SpecificationsPressure (Tons) 27.5
Approximate Punching Speed 3 seconds
Maximum Hole Size - Round 7/8" - (22.2mm)
Maximum Thickness - Round 3/8" - (9.5mm)
Maximum Hole Size - Oblong 11/16" x 13/16" (18mm x 21mm)
Maximum Thickness - Oblong 3/8" - (9.5mm)
Maximum Punch Throat Depth 3-15/16" - (100mm)
120V/50-60Hz AC 12.2 Amps
Weight (less work stand) 79.3 lbs - (36 kg)
Shipping Weight (approx) 110 lbs - (49.9 kg)
75006 SpecificationsPressure (Tons) 34.1
Approximate Punching Speed 4 seconds
Maximum Hole Size - Round 15/16" - (23.8mm)
Maximum Thickness - Round 1/2" - (12.7mm)
Maximum Hole Size - Oblong 11/16" x 13/16" (18mm x 21mm)
Maximum Thickness - Oblong 1/2" - (12.7mm)
Maximum Punch Throat Depth 1-31/32" - (50mm)
120V/50-60Hz AC 12.2 Amps
Weight (less work stand) 65 lbs - (29.5 kg)
Shipping Weight (approx) 88.3 lbs - (40 kg)
ROUND PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
5/32" .157 4mm 76200 5/64 (.078) 14 GA. F, A Die 5/32 A 76204
3/16" .197 5mm 76201 5/64 (.078) to .11814 to 12 GA. F, A Die 3/16 A 76205
7/32" .217 5.5mm 76202 5/64 (.078) to .11814 to 12 GA. F, A Die 7/32 A 76206
15/64" .236 6mm 76203
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 15/64 A 76207
>1/8 (.125) to 5/32 (.157)10 to 9 GA. F, A Die 15/64 B 76216
1/4" .256 6.5mm 75421
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 1/4 A 76208
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 1/4 B 76217
5/16" .315 8mm 75422
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 5/16 A 76209
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 5/16 B 76218
11/32" .335 8.5mm 75423
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 11/32 A 76210
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 11/32 B 76219
3/8” .394 10mm 75424
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 3/8 A 76211
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 3/8 B 76220
19/64 (.276) max. C Die 3/8 C 76245
7/16” .433 11mm 75425
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 7/16 A 76212
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 7/16 B 76221
19/64 (.276) max. C Die 7/16 C 76246
1/2" .512 13mm 75426
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 1/2 A 76213
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 1/2 B 76222
9/16" .551 14mm 75427
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 9/16 A 76214
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 9/16 B 76223
19/32" .591 15mm 76248
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 19/32 A 76215
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 19/32 B 76224
OBLONG PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
1/4"x
3/8"
.256x
.394
6.5mmx
10mm76225
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 1/4 x 3/8 A 76229
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 1/4 x 3/8 B 76236
1/4" x
1/2"
.256x
.512
6.5mmx
13mm75638
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 1/4 x 1/2 A 76230
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 1/4 x 1/2 B 76237
11/32"x
1/2"
.335x
.512
8.5mmx
13mm75639
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 11/32 x 1/2 A 76231
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 11/32 x 1/2 B 76238
11/32"x
43/64"
.335x
.669
8.5mmx
17mm76226
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 11/32 x 43/64 A 76232
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 11/32 x 43/64 B 76239
23/64"x
17/32"
.354x
.531
9mmx
13.5mm76227
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 23/64 x 17/32 A 76233
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 23/64 x 17/32 B 76240
3/8”x
19/32”
.394x
.591
10mmx
15mm76228
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 3/8 x 19/32 A 76234
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 3/8 x 19/32 B 76241
7/16”x
5/8”
.433x
.650
11mmx
16.5mm75640
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A Die 7/16 x 5/8 A 76235
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A Die 7/16 x 5/8 B 76242
Punch-Pro™ — MODEL 76000
e / 6 6
Die 7/16 C 76246
Die 1/2 A 76213
Die 1/2 B 76222
Die 9/16 A 76214
Die 9/16 B 76223
Die 19/32 A 76215
Die 19/32 B 76224
Punching capacity data is based on mild steel of 65,000 psi tensile strength.
Legend
31
(F)Flat Bar
(A)Angle
(C)Channel
Punching capacity data is based on mild steel of 65,000 psi tensile strength.
Legend
Punch-Pro™ — MODEL 75002.5AROUND PUNCH MATERIAL DIE
Size PartNo. Thickness Style Size Part
No.Nominal Actual Metric
1/4" .256 6.5mm 75421
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/4 A 75432
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/4 B 75433
5/16" .315 8mm 75422
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 5/16 A 75434
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 5/16 B 75435
11/32" .335 8.5mm 75423
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 11/32 A 75436
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/32 B 75437
3/8" .394 10mm 75424
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 3/8 A 75438
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 3/8 B 75439
19/64 (.297)max. C Die 3/8 C 75450
7/16" .433 11mm 75425
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 7/16 A 75440
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/16 B 75441
19/64 (.297)max. C Die 7/16 C 75451
1/2" .512 13mm 75426
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/2 A 75442
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/2 B 75443
19/64 (.297)max. C Die 1/2 C 75452
9/16" .551 14mm 75427
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 9/16 A 75444
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 9/16 B 75445
19/64 (.297)max. C Die 9/16 C 75453
5/8" .625 15.9mm 75428
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 5/8 A 75446
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 5/8 B 75447
11/16" .688 17.5mm 75429
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 11/16 A 75448
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/16 B 75449
3/4" .748 19mm 75430
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 3/4 A 75729
>1/8 (.125) to 3/16 (.188)10 to 7 GA. F, A, H Die 3/4 B 75730
25/32" .787 20mm 75431
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 25/32 A 75731
>1/8 (.125) to 3/16 (.188)10 to 7 GA. F, A, H Die 25/32 B 75732
SQUARE PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
1/4" .256 6.5mm 75800 >1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/4 B 75804
5/16" .315 8mm 75801 >1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 5/16 B 75805
3/8" .394 10mm 75802 >1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 3/8 B 75806
7/16" .433 11mm 75803 >1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/16 B 75807
OBLONG PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
1/4"x
1/2"
.256x
.512
6.5mmx
13mm75638
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/4 x 1/2 A 75643
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/4 x 1/2 B 75644
19/64 (.297)max. C Die 1/4 x 1/2 C 75653
11/32" x
1/2"
.335x
.512
8.5mmx
13mm75639
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 11/32 x 1/2 A 75645
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/32 x 1/2 B 75646
19/64 (.297)max. C Die 11/32 x 1/2 C 75654
7/16"x
5/8"
.433x
.650
11mmx
16.5mm75640
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 7/16 x 5/8 A 75647
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/16 x 5/8 B 75648
19/64 (.297)max. C Die 7/16 x 5/8 C 75655
1/2"x
3/4"
.512x
.768
13mmx
19.5mm75641
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/2 x 3/4 A 75649
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/2 x 3/4 B 75650
9/16"x
13/16"
.551x
.827
14mmx
21mm75642
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 9/16 x 13/16 A 75651
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 9/16 x 13/16 B 75652
32
(F)Flat Bar
(A)Angle
(H)H-Steel
(C)Channel
Punching capacity data is based on mild steel of 65,000 psi tensile strength.
Punch-Pro™ — MODEL 75003A
LegendLP=Long PunchLD=Long Die(F)
Flat Bar(A)
Angle(H)
H-Steel(C)
Channel(L)
Lip Channel
Punchhg Die
ROUND PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
1/4" .256 6.5mm 75421
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 1/4 A 75454
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 1/4 B 75455
5/16" .315 8mm 75422
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 5/16 A 75456
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 5/16 B 75457
11/32" .335 8.5mm 75423
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 11/32 A 75458
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 11/32 B 75459
3/8" .394 10mm
75424
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 3/8 A 75460
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 3/8 B 75461
75476(LP)
5/64 (.078) to 1/8 (.125)14 to 11 GA.
F, A,H, L
Die 3/8 A 75438
>1/8 (.125) to 1/4 (.250)10 to 3 GA.
F, A,H, L
Die 3/8 B 75439
19/64 (.297)max. C Die 3/8 C 75450
7/16" .433 11mm
75425
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 7/16 A 75462
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 7/16 B 75463
75477(LP)
5/64 (.078) to 1/8 (.125)14 to 11 GA.
F, A,H, L
Die 7/16 A 75440
>1/8 (.125) to 1/4 (.250)10 to 3 GA.
F, A,H, L
Die 7/16 B 75441
19/64 (.297)max. C Die 7/16 C 75451
1/2" .512 13mm
75426
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 1/2 A 75464
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 1/2 B 75465
75478(LP)
5/64 (.078) to 1/8 (.125)14 to 11 GA.
F, A,H, L
Die 1/2 A 75442
>1/8 (.125) to 1/4 (.250)10 to 3 GA.
F, A,H, L
Die 1/2 B 75443
19/64 (.297)max. C Die 1/2 C 75452
9/16" .551 14mm
75427
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 9/16 A 75466
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 9/16 B 75467
75479(LP)
5/64 (.078) to 1/8 (.125)14 to 11 GA.
F, A,H, L
Die 9/16 A 75444
>1/8 (.125) to 1/4 (.250)10 to 3 GA.
F, A,H, L
Die 9/16 B 75445
19/64 (.297)max. C Die 9/16 C 75453
5/8" .625 15.9mm 75428
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 5/8 A 75468
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 5/8 B 75469
11/16" .688 17.5mm 75429
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 11/16 A 75470
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 11/16 B 75471
3/4" .748 19mm 75430
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 3/4 A 75472
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 3/4 B 75473
25/32" .787 20mm 75431
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 25/32 A 75474
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 25/32 B 75475
OBLONG PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
1/4"x
1/2"
.256x
.512
6.5mmx
13mm
75638
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 1/4 x 1/2 A 75656
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 1/4 x 1/2 B 75657
75666(LP)
5/64 (.078) to 1/8 (.125)14 to 11 GA.
F, A,H, L
Die 1/4 x 1/2 A 75643
>1/8 (.125) to 1/4 (.250)10 to 3 GA.
F, A,H, L
Die 1/4 x 1/2 B 75644
19/64 (.297)max. C Die 1/4 x 1/2 C 75653
11/32"x
1/2"
.335x
.512
8.5mmx
13mm
75639
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 11/32 x 1/2 A 75658
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 11/32 x 1/2 B 75659
75667(LP)
5/64 (.078) to 1/8 (.125)14 to 11 GA.
F, A,H, L
Die 11/32 x 1/2 A 75645
>1/8 (.125) to 1/4 (.250)10 to 3 GA.
F, A,H, L
Die 11/32 x 1/2 B 75646
19/64 (.297)max. C Die 11/32 x 1/2 C 75654
7/16"x
5/8"
.433x
.650
11mmx
16.5mm
75640
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 7/16 x 5/8 A 75660
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 7/16 x 5/8 B 75661
75668(LP)
5/64 (.078) to 1/8 (.125)14 to 11 GA.
F, A,H, L
Die 7/16 x 5/8 A 75647
>1/8 (.125) to 1/4 (.250)10 to 3 GA.
F, A,H, L
Die 7/16 x 5/8 B 75648
19/64 (.297)max. C Die 7/16 x 5/8 C 75655
1/2"x
3/4"
.512x
.768
13mmx
19.5mm75641
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 1/2 x 3/4 A 75662
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 1/2 x 3/4 B 75663
9/16"x
13/16"
.551x
.827
14mmx
21mm75642
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die LD 9/16 x 13/16 A 75664
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die LD 9/16 x 13/16 B 75665
33
Punching capacity data is based on mild steel of 65,000 psi tensile strength.
Legend
ROUND PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
1/4" .256 6.5mm 75484
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/4 R 75495
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/4 S 75496
5/16" .315 8mm 75485
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 5/16 R 75497
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 5/16 S 75498
11/32" .335 8.5mm 75486
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 11/32 R 75499
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/32 S 75500
3/8" .394 10mm 75487
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 3/8 R 75501
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 3/8 S 75502
5/16 (.312)max. C Die 3/8 C 75524
7/16" .433 11mm 75488
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 7/16 R 75503
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/16 S 75504
>1/4 (.250)to 3/8 (.375) F, A, H Die 7/16 T 75505
5/16 (.312)max. C Die 7/16 C 75525
1/2" .512 13mm 75489
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/2 R 75506
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/2 S 75507
>1/4 (.250)to 3/8 (.375) F, A, H Die 1/2 T 75508
5/16 (.312)max. C Die 1/2 C 75526
9/16" .551 14mm 75490
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 9/16 R 75509
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 9/16 S 75510
>1/4 (.250)to 3/8 (.375) F, A, H Die 9/16 T 75511
5/16 (.312)max. C Die 9/16 C 75527
5/8" .625 15.9mm 75491
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 5/8 R 75512
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 5/8 S 75513
>1/4 (.250)to 3/8 (.375) F, A, H Die 5/8 T 75514
5/16 (.312)max. C Die 5/8 C 75528
11/16" .688 17.5mm 75492
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 11/16 R 75515
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/16 S 75516
>1/4 (.250)to 3/8 (.375) F, A, H Die 11/16 T 75517
5/16 (.312)max. C Die 11/16 C 75529
3/4" .750 19mm 75493
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 3/4 R 75518
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 3/4 S 75519
>1/4 (.250)to 3/8 (.375) F, A, H Die 3/4 T 75520
5/16 (.312)max. C Die 3/4 C 75530
25/32" .787 20mm 75494
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 25/32 R 75521
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 25/32 S 75522
>1/4 (.250)to 3/8 (.375) F, A, H Die 25/32 T 75523
5/16 (.312)max. C Die 25/32 C 75531
13/16" .812 20.6mm 75733
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 13/16 R 75734
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 13/16 S 75787
>1/4 (.250)to 3/8 (.375) F, A, H Die 13/16 T 75785
5/16 (.312)max. C Die 13/16 C 75786
OBLONG PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
1/4"x
1/2"
.256x
.512
6.5mmx
13mm75669
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/4 x 1/2 R 75674
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/4 x 1/2 S 75675
11/32"x
1/2"
.335x
.512
8.5mmx
13mm75670
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 11/32 x 1/2 R 75676
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/32 x 1/2 S 75677
7/16"x
5/8"
.433x
.650
11mmx
16.5mm75671
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 7/16 x 5/8 R 75678
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/16 x 5/8 S 75679
>1/4 (.250)to 3/8 (.375) F, A, H Die 7/16 x 5/8 T 75680
5/16 (.312)max. C Die 7/16 x 5/8 C 75687
1/2"x
3/4"
.512x
.768
13mmx
19.5mm75672
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/2 x 3/4 R 75681
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/2 x 3/4 S 75682
>1/4 (.250)to 3/8 (.375) F, A, H Die 1/2 x 3/4 T 75683
5/16 (.312)max. C Die 1/2 x 3/4 C 75688
9/16"x
13/16"
.551x
.827
14mmx
21mm75673
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 9/16 x 13/16 R 75684
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 9/16 x 13/16 S 75685
>1/4 (.250)to 3/8 (.375) F, A, H Die 9/16 x 13/16 T 75686
5/16 (.312)max. C Die 9/16 x 13/16 C 75689
34
(F)Flat Bar
(A)Angle
(H)H-Steel
(C)Channel
Punch-Pro™ — MODEL 75004R
Flat Bar AnglegH-SteelChannel
Punching capacity data is based on mild steel of 65,000 psi tensile strength.
Punch-Pro™ — MODEL 75005
nsile strength.
Legend
ROUND PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
7/16" .433 11mm 75532
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/16 A 75541
>1/4 (.250)to 3/8 (.375) F, A, H Die 7/16 B 75542
5/16 (.312)max. C Die 7/16 C 75559
1/2" .512 13mm 75533
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/2 A 75543
>1/4 (.250)to 3/8 (.375) F, A, H Die 1/2 B 75544
5/16 (.312)max. C Die 1/2 C 75560
9/16" .551 14mm 75534
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 9/16 A 75545
>1/4 (.250)to 3/8 (.375) F, A, H Die 9/16 B 75546
5/16 (.312)max. C Die 9/16 C 75561
5/8" .625 15.9mm 75535
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 5/8 A 75547
>1/4 (.250)to 3/8 (.375) F, A, H Die 5/8 B 75548
5/16 (.312)max. C Die 5/8 C 75562
11/16" .688 17.5mm 75536
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/16 A 75549
>1/4 (.250)to 3/8 (.375) F, A, H Die 11/16 B 75550
5/16 (.312)max. C Die 11/16 C 75563
3/4" .750 19mm 75537
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 3/4 A 75551
>1/4 (.250)to 3/8 (.375) F, A, H Die 3/4 B 75552
5/16 (.312)max. C Die 3/4 C 75564
25/32" .787 20mm 75538
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 25/32 A 75553
>1/4 (.250)to 3/8 (.375) F, A, H Die 25/32 B 75554
5/16 (.312)max. C Die 25/32 C 75565
13/16" .812 20.6mm 75539
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 13/16 A 75555
>1/4 (.250)to 3/8 (.375) F, A, H Die 13/16 B 75556
5/16 (.312)max. C Die 13/16 C 75566
7/8" .875 22.2mm 75540
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/8 A 75557
>1/4 (.250)to 3/8 (.375) F, A, H Die 7/8 B 75558
5/16 (.312)max. C Die 7/8 C 75567
OBLONG PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
7/16"x
5/8"
.433x
.650
11mmx
16.5mm75690
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/16 x 5/8 A 75694
>1/4 (.250)to 3/8 (.375) F, A, H Die 7/16 x 5/8 B 75695
5/16 (.312)max. C Die 7/16 x 5/8 C 75702
1/2"x
3/4"
.512x
.768
13mmx
19.5mm75691
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/2 x 3/4 A 75696
>1/4 (.250)to 3/8 (.375) F, A, H Die 1/2 x 3/4 B 75697
5/16 (.312)max. C Die 1/2 x 3/4 C 75703
9/16"x
13/16"
.551x
.827
14mmx
21mm75692
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 9/16 x 13/16 A 75698
>1/4 (.250)to 3/8 (.375) F, A, H Die 9/16 x 13/16 B 75699
5/16 (.312)max. C Die 9/16 x 13/16 C 75704
11/16"x
13/16"
.709x
.827
18mmx
21mm75693
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/16 x 13/16 A 75700
>1/4 (.250)to 3/8 (.375) F, A, H Die 11/16 x 13/16 B 75701
35
(F)Flat Bar
(A)Angle
(H)H-Steel
(C)Channel
Punching capacity data is based on mild steel of 65,000 psi tensile strength.
Punch-Pro™ — MODEL 75006
Legend
ROUND PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
7/16" .433 11mm 75568
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 7/16 A 75578
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/16 B 75579
>1/4 (.250)to 3/8 (.375) F, A, H Die 7/16 C 75580
5/16 (.312)max. C Die 7/16 CC 75616
1/2" .512 13MM 75569
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/2 A 75581
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/2 B 75582
>1/4 (.250)to 3/8 (.375) F, A, H Die 1/2 C 75583
5/16 (.312)max. C Die 1/2 CC 75617
9/16" .552 14mm 75570
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 9/16 A 75584
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 9/16 B 75585
>1/4 (.250)to 3/8 (.375) F, A, H Die 9/16 C 75586
>3/8 (.375)to 1/2 (.500) F, A, H Die 9/16 D 75587
5/16 (.312)max. C Die 9/16 CC 75618
>5/16 (.312)to 1/2 (.500) C Die 9/16 CD 75619
5/8" .625 15.9mm 75571
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 5/8 A 75588
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 5/8 B 75589
>1/4 (.250)to 3/8 (.375) F, A, H Die 5/8 C 75590
>3/8 (.375)to 1/2 (.500) F, A, H Die 5/8 D 75591
5/16 (.312)max. C Die 5/8 CC 75620
>5/16 (.312)to 1/2 (.500) C Die 5/8 CD 75621
11/16" .688 17.5mm 75572
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 11/16 A 75592
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/16 B 75593
>1/4 (.250)to 3/8 (.375) F, A, H Die 11/16 C 75594
>3/8 (.375)to 1/2 (.500) F, A, H Die 11/16 D 75595
5/16 (.312)max. C Die 11/16 CC 75622
>5/16 (.312)to 1/2 (.500) C Die 11/16 CD 75623
3/4" .750 19mm 75573
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 3/4 A 75596
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 3/4 B 75597
>1/4 (.250)to 3/8 (.375) F, A, H Die 3/4 C 75598
>3/8 (.375)to 1/2 (.500) F, A, H Die 3/4 D 75599
5/16 (.312)max. C Die 3/4 CC 75624
>5/16 (.312)to 1/2 (.500) C Die 3/4 CD 75625
25/32" .787 20mm 75574
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 25/32 A 75600
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 25/32 B 75601
>1/4 (.250)to 3/8 (.375) F, A, H Die 25/32 C 75602
>3/8 (.375)to 1/2 (.500) F, A, H Die 25/32 D 75603
5/16 (.312)max. C Die 25/32 CC 75626
>5/16 (.312)to 1/2 (.500) C Die 25/32 CD 75627
ROUND PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
13/16" .812 20.6mm 75575
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 13/16 A 75604
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 13/16 B 75605
>1/4 (.250)to 3/8 (.375) F, A, H Die 13/16 C 75606
>3/8 (.375)to 1/2 (.500) F, A, H Die 13/16 D 75607
5/16 (.312)max. C Die 13/16 CC 75628
>5/16 (.312)to 1/2 (.500) C Die 13/16 CD 75629
7/8" .875 22.2mm 75576
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 7/8 A 75608
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/8 B 75609
>1/4 (.250)to 3/8 (.375) F, A, H Die 7/8 C 75610
>3/8 (.375)to 1/2 (.500) F, A, H Die 7/8 D 75611
5/16 (.312)max. C Die 7/8 CC 75630
>5/16 (.312)to 1/2 (.500) C Die 7/8 CD 75631
15/16" .938 23.8mm 75577
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 15/16 A 75612
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 15/16 B 75613
>1/4 (.250)to 3/8 (.375) F, A, H Die 15/16 C 75614
>3/8 (.375)to 15/32 (.469) F, A, H Die 15/16 D 75615
OBLONG PUNCH MATERIAL DIESize Part
No. Thickness Style Size PartNo.Nominal Actual Metric
7/16"x
5/8"
.433x
.650
11mmx
16.5mm75705
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 7/16 x 5/8 A 75709
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 7/16 x 5/8 B 75710
>1/4 (.250)to 3/8 (.375) F, A, H Die 7/16 x 5/8 C 75711
5/16 (.312)max. C Die 7/16 x 5/8 CC 75723
1/2"x
3/4"
.512x
.768
13mmx
19.5mm75706
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 1/2 x 3/4 A 75712
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 1/2 x 3/4 B 75713
>1/4 (.250)to 3/8 (.375) F, A, H Die 1/2 x 3/4 C 75714
5/16 (.312)max. C Die 1/2 x 3/4 CC 75724
9/16"x
13/16"
.551x
.827
14mmx
21mm75707
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 9/16 x 13/16 A 75715
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 9/16 x 13/16 B 75716
>1/4 (.250)to 3/8 (.375) F, A, H Die 9/16 x 13/16 C 75717
>3/8 (.375)to 1/2 (.500) F, A, H Die 9/16 x 13/16 D 75718
5/16 (.312)max. C Die 9/16 x 13/16 CC 75725
>5/16 (.312)to 1/2 (.500) C Die 9/16 x 13/16 CD 75726
11/16"x
13/16"
.709x
.827
18mmx
21mm75708
5/64 (.078) to 1/8 (.125)14 to 11 GA. F, A, H Die 11/16 x 13/16 A 75719
>1/8 (.125) to 1/4 (.250)10 to 3 GA. F, A, H Die 11/16 x 13/16 B 75720
>1/4 (.250)to 3/8 (.375) F, A, H Die 11/16 x 13/16 C 75721
>3/8 (.375)to 1/2 (.500) F, A, H Die 11/16 x 13/16 D 75722
5/16 (.312)max. C Die 11/16 x 13/16 CC 75727
>5/16 (.312)to 1/2 (.500) C Die 11/16 x 13/16 CD 75728
36
(F)Flat Bar
(A)Angle
(H)H-Steel
(C)Channel
37
The exclusive Hougen-Ogura punch geometry and die clearances reduces press tonnage requirements and increases portability. Premium heat treated materials help achieve tool life increases of two to two and a half times that of other manufacturers and generic copies. The use of incorrect punches or dies could result in unacceptable performance or damage to the machine and may void the warranty. Hougen Manufacturing Inc. recommends the use of only genuine Hougen-Ogura punches and dies.
Hougen-Ogura Repair CenterHougen Manufacturing, Inc.3001 Hougen DriveSwartz Creek, Michigan 48473 USAPhone: (810) 635-7111Fax: (810) 635-8277
Part No. A B C D E F G H I J
76000 .31 1.02 .51 1.81 — — — — — 10.60
75002.5A .31 2.36 .59 2.99 — 2.21 2.47 3.03 2.12 20.16
75003A .31 2.16 .59 L.D. STD. 4.29 2.91 — 2.59 2.47 3.06 1.94 21.42
75004R .43 1.57 .67 3.03 — 3.05 2.47 3.16 2.56 21.26
75005 .43 3.94 .75 2.76 4.38 2.73 2.88 3.56 3.19 21.00
75006 .59 1.97 .94 3.62 — 2.78 3.16 3.47 3.16 19.72
Model Dimensions Special Notice Regarding Punches and Dies
ACC Machinery Co., Inc.
Phoenix AZ 85007602-258-7330
Fastenal Services Co.4025 Finch Rd.Modesto CA 95357209-548-5000
Kenbil Service Center2900 Adams St C-18Riverside CA 92504951-689-6633
Caltool Industrial470 Hester StreetSan Leandro CA 94577510-729-0600
AIS Industrial
Denver CO 80207303-355-2391
Jossam Tool Repair411 Burnham StreetEast Hartford CT 06108860-290-9044
Colony Hardware Supply15 Stiles Street New Haven CT 06512203-466-5252
Fastenal Services Co.6445 Fulton
404-346-4520
Idaho Tool & Equip452 CaldwellNampa ID 83651208-465-7533
Fastenal Services Co.
Indianapolis IN 46254317-280-2502
Fastenal Services Co.9911 Woodend RoadEdwardsville KS 66111913-422-8221
Allied Sales & Services1508 River Oaks Rd WestHarahan LA 70123504-734-9566
N.H. Bragg & Sons92 Perry RoadBangor ME 04401207-947-8611
Hougen Manufacturing3001 Hougen DriveSwartz Creek MI 48473810-635-7111
Westbrook Engineering23501 Mound RoadWarren MI 48091586-759-3100
Fastenal Services Co.15 Prarie Island RoadWinona MN 55987507-453-8280
Ceekay Repair Center5835 Manchester AveSt. Louis MO 63110314-644-3500
Mid-South Welding Supply505 51st. AveMeridian MS 39307601-483-9331
Fastenal Services Co.4110 Premier Dr. #102High Point NC 27265336-841-6555
A&A Industrial Supplies245 Meacham AveElmont NY 11003516-437-0114
Awisco NY Corp55-16 43rd Ave.Maspeth NY 11378718-786-7788
Hanes Supply Repair Center20 Jetview DriveRochester NY 14624585-235-0169
Ace Tool Repair2201 Wantagh Ave.Wantagh NY 11793516-783-8899
Awisco NY Corp.
West Babylon NY 11704631-643-1308
Cincinnati Electrical Repair2023 Elm StreetCincinnati OH 45202513-621-2183
Pennsylvania Tool Sales625 Bev RoadYoungstown OH 44512330-758-0845
Wilbanks Repair Center5532 S. 94th East Ave.Tulsa OK 74145918-627-8445
Matheson7926 NE Killingsworth StPortland OR 97218503-221-1100
Fastenal Services Co.1225 Mid Valley DriveJessup PA 18434570-307-6555
Boyer Machinery2280 Wyandotte Road
215-657-2242
(Service Centers listed alphabetically by State/Province)Fastenal Services Co.3833 Airport RoadDenton TX 76207972-446-4389
Arcmaster Repair Center301 Woodrow Ave.Forth Worth TX 76105817-531-8101
Arcet Equipment Co.3416 Odd Fellows RoadLynchburg VA 24501434-847-1234
American Equip Services22418 72nd Ave. SouthKent WA 98032253-395-9947
Edge Construction Supply1503 E. Riverside Ave.Spokane WA 99202509-535-9841
Fastenal Services Co.9725 47th. Ave SWLakewood WA 98489253-983-0015
CANADAIndustrial Power Tool8, 4115 64 Ave S.E.Calgary, AlbertaCanada T2C 2C8403-261-0780
Celtic Ind. Tools & Repair5736-103 A StreetEdmonton AlbertaCanada T6H 3J5780-431-0970
Power Tool Clinic#105 19835-56 Ave.Langley British ColumbiaCanada V3A 3Y1604-530-3550
FACTORY AUTHORIZED WARRANTY SERVICE CENTERS (MAG DRILL & PAINT SHAKER ONLY)
Anchor Products1810 Dublin Ave.Winnipeg ManitobaCanada R3H 0H3204-633-0064
Hougen Canada309 Nash Road NorthHamilton OntarioCanada L8H 7P4905-573-9088
Fastenal Services Co.860 Trillium Dr.Kitchener OntarioCanada N3R 1K4519-748-6566
Outiltech Orleans, Inc.4975 Rue Rideau Local 180Quebec City Quebec
418-877-7776
Brunswick Ind. Supply
Dieppe New Brunswick
506-859-1303
(MAG DRILL & PAINT SHAKER ONLY)
38
OTHER HELPFUL INFORMATIONHardness Conversion ChartRockwell Hardness
“C” ScaleBrinell
Hardness20 226
25 253
28 271
30 286
32 301
34 319
36 336
38 353
40 371
43 400
Dia. Range Minimum (Inches)
Maximum (Inches)
RotaCut™
1/4", 9/32",6mm, 7mm
5/16" - 17/32" .0015 .0070
8mm - 14mm .0015 .0070
9/16" - 1-1/2" .0020 .0100
15mm - 25mm .0020 .0100
“12,000-Series”
7/16", 1/2",12mm, 13mm
.0020 .0100
9/16" - 1-5/16" .0020 .0150
14mm - 34mm .0020 .0150
1-3/8" - 2-3/8" .0020 .0200
35mm - 51mm .0020 .0200
“42,000-Series”
3/4" - 13/16" .0020 .0150
7/8" - 2" .0020 .0200
“43,000-Series”
2-1/16" - 3-1/16"
.0020 .0200
Grind Down Limits
Material Cutting Speed: Surface Feet per Minute (SFM)
Type of Material Brinell Hardness
Cutting Speed (sfm)
ToolMaterial
Aluminum
383.0, 413.0 390.0, 392.0
* 30-150 500-1000 M2
* 40-125 450-600 M2
* 40-125 450-600 M2
* 40-125 75-100 M2
Brass & Bronze ---- 300-600 M2
Cast Iron 120-150 75-125 M2
160-220 50-100 M2/M42
230-300 30-50 M42
Malleable Iron 110-160 100-130 M2
160-220 75-100 M2
200-320 30-60 M42
Magnesium * 50-90 400-800 M2
Nickel Alloys 80-170 60-80 M2
115-240 35-50 M2
150-330 20-40 M42
SteelFree Machining
---- 105-130 M2
Carbon Steel 125-160 90-110 M2
Steel Alloys Soft
170-210 65-90 M2
Steel Alloys Medium
220-250 55-75 M2
Steel Alloys Hard
260-300 35-50 M2/M42
325-400 30-40M42/
M42 Coated
Tool Steel210-250 35-60 M2/M42
Forgings ---- 40-50 M2
Armor Plate 200-250 40-55 M2/M42
250-300 30-45M42/
M42 Coated
Stainless SteelFerritic
135-185 90-125 M2
Stainless SteelAustenitic
135-185 55-75 M2
225-275 40-70 M2
Stainless SteelNitonic (Low Alloy)
275-325 25-35 M42
Stainless SteelMartensitic By Hardness Range
135-185 70-125 M2
185-240 45-110 M2
275-325 35-55 M42
375-425 30-55 M42 Coated
Stainless SteelPrecipitation Hardening By Hardness Range
150-200 45-55 M2
275-325 40-50 M42
325-375 35-45 M42 Coated
Visit www.hougen.com for an interactive Speed
& Feed Calculator
Mild Steel Stainless Cast Iron164 115 131
Carbide Cutting Speed: Surface Feet per Minute (SFM)
39
Cutter Dia.
(Inches)
Surface Feet per Minute10 20 30 40 50 60 70 80 90 100
Revolutions per Minute (RPM).7500 51 102 153 204 255 306 357 407 458 509.8750 44 87 131 175 218 262 306 349 393 4371.0000 38 76 115 153 191 229 267 306 344 3821.1250 34 68 102 136 170 204 238 272 306 3401.2500 31 61 92 122 153 183 214 244 275 3061.3750 28 56 83 111 139 167 194 222 250 2781.5000 25 51 76 102 127 153 178 204 229 2551.6250 24 47 71 94 118 141 165 188 212 2351.7500 22 44 65 87 109 131 153 175 196 2181.8750 20 41 61 81 102 122 143 163 183 2042.0000 19 38 57 76 95 115 134 153 172 1912.1250 18 36 54 72 90 108 126 144 162 1802.2500 17 34 51 68 85 102 119 136 153 1702.3750 16 32 48 64 80 96 113 129 145 1612.5000 15 31 46 61 76 92 107 122 138 1532.6250 15 29 44 58 73 87 102 116 131 1462.7500 14 28 42 56 69 83 97 111 125 1392.8750 13 27 40 53 66 80 93 106 120 1333.0000 13 25 38 51 64 76 89 102 115 1273.1250 12 24 37 49 61 73 86 98 110 1223.2500 12 24 35 47 59 71 82 94 106 1183.3750 11 23 34 45 57 68 79 91 102 1133.5000 11 22 33 44 55 64 76 87 98 1093.6250 11 21 32 42 53 63 74 84 95 1053.7500 10 20 31 41 51 61 71 81 92 1023.8750 10 20 30 39 49 59 69 79 89 994.0000 10 19 29 38 48 57 67 76 86 95
Conversion Chart: SFM to RPM
To compute RPM's for cutting speeds other than those shown, either select two speeds from the table that add up to the speed desired and then add their RPM's, or select a factor which, when multiplied by one of the speeds in the table, gives the desired speed and multiply its RPM by the same factor.
Examples: To find the RPM for a 1" diameter cutter run at 150 SFM --1) Add RPM's for 100 SFM (382) and 50 SFM (191) = 573 rpm2) Or multiply the RPM for 50 SFM (191) by a factor of 3 = 573 rpm
TECHNICAL TIPS#1 cause of broken or prematurely dull cutters is too slow of feed rate. Slower feed rates • will not add life to your cutter but actually reduce the cutter's life. Use firm steady feed pressure throughout cut.
Always make sure to clear all chips from your cutter before starting the next hole. •
Make sure support system for drill arbor is in place and not worn out. If using on a drill • press, a support system must be used.
For harder material use Hougen's Premium Cutters or Copperhead™ Carbide Tip Cutters. •
Make sure mag drill is on a clean work piece and securely attached. Uneven or large build • up of debris can cause drill slippage. Material must be at least 3/8" thick. Painted material can also be troublesome if paint buildup does not allow magnet to hold securely.
When slug ejection becomes unreliable or tool resists cutting, resharpen or replace your • cutter.
Always use coolant when drilling. For best results use Hougen's Slick-Stik™ or • RotaMagic™ cutting lubricant.
For best performance always maintain your drill as instructed in your operator's manual. •
Always observe standard and specific safety instructions.•
OTHER HELPFUL INFORMATION
FOR MORE INFORMATION VISIT WWW.HOUGEN.COM OR CALL HOUGEN TECHNICAL SERVICE 800-426-7818
Distributed By:
OUR COMMITMENT TO PROVIDE YOUWITH HOLEMAKING INNOVATIONS
Rotabroach® IndustrialAnnular CuttersProduce holes faster than spade, twist, or indexable drills with less power. Improve hole accuracy, finish, and tool life. Hougen® heavy duty annular cutters with patented tooth geometry for use on lathes, mills, drills, and other high production and CNC machine tools.
At Hougen®, we want you to make more holes, more often, in more places all in less time... profitably. To that end, Hougen engineers are constantly striving to bring you the right tools.
Hougen®
one of a family of Hole making products that can be found on the production floor
Ask your distributor about how Hougen’s fine products can improve your Hole making productivity.
HOUGEN MANUFACTURING, INC.
Form No. 02574 5/12
Hougen, Hougen-Edge, Rotabroach, and Trak-Star and their respective logos are proprietary trademarks of Hougen Manufacturing, Inc. Ogura and the Ogura logo are proprietary trademarks of Ogura & Co., Ltd., Vac-Pad is a proprietary trademark of Drillmate PTY, Ltd.
Hougen Patent Notice
patents, foreign patents, and pending patents.
5145296 5624213 5607266 5902076 6280123 D445808 D447494 D577750
Photographs and specifications are accurate in detail at time of printing. Manufacturer reserves the right to make improvements and modifications to designs without prior notice.
COMMERCIAL/INDUSTRIAL LIMITED WARRANTY
Hougen Manufacturing, Inc. warrants its Portable Magnetic Drills, Electro-hydraulic Hole Punchers, Trak-Star Rail Drills, and Tornado II Paint Shakers for one (1) year, and it's Husqvarna Saw and other products for ninety (90) days from date of purchase against defects due to faulty material or workmanship and will repair or replace (at its option) without charge any items returned. This warranty is void if the item has been damaged by accident or unreasonable use, neglect, improper service, or other causes not arising out of defects in material or workmanship. No other expressed warranty is given or authorized. Hougen Manufacturing, Inc. disclaims any implied warranty of Merchantability or fitness for any period beyond the expressed warranty and shall not be liable for incidental or consequential damages. Some states do not allow exclusion of incidental or consequential damages or limitation on how long an implied warranty lasts and, if the law of such a state governs your purchase, the above exclusion and limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
To obtain warranty service, return the item(s), transportation prepaid to your nearest Factory Authorized Warranty Service Center, or to Hougen Manufacturing, Inc., 3001 Hougen Drive, Swartz Creek, MI 48473.
This warranty is in lieu of any other warranty, expressed or implied, including any warranty of merchantability or fitness for a particular purpose.
H P t t N ti
Hougen® QualityNo matter the tool, we stand behind our product 100%. If ever you are not satisfied with one of our products, let us know and we'll work to make you happy. That's why we offer the industries best...
Reliability
HOUGEN MANUFACTURING, INC.